Hits | Laatste update: vrijdag 18 april 2014 |
Online-winkel

TIP: Meerdere trefwoorden scheiden met een komma.

SEARCH:  
Keystone Handlebar Chrome

Keystone Handlebar Chrome

Chrome; 1 inch; dimpled.
82-09 alle modellen.
(Excl. 08-09 H-D E-Throttle & 88-09 Springers)
Product: 006360
€ 112,50 

 
*** AANBIEDING ***
006564 :  Contour Style Handlebar Control Kit Chrome
Chrome billet handlebar ( 1 inch ) control kit with 5/8" bore master cylinder, switch housings, brake and clutch levers, and hardware for single disc.
The kit is for use on all HD models with 1982 to 1995 switches (except those with radio controls).
1996 up will require some wiring modification.
Zie foto's hieronder voor meer details van deze set gemonteerd op de Softail van Flip.

€ 287,50
per set
*** AANBIEDING ***
006054 :  Stuurcontrolkit chroom 96-13 Single Disq
Chrome Plated Kit with ergonomic levers with chrome switches.
Kit includes a 9/16" bore master cylinder, clutch handle with clamp, and 2 pairs of switch housings with chrome switches for single disc.
Fits :
1996-2013 Big-Twin
1996-2003 XL Sportster
( excl. 11-13 Softail; 12-13 Dyna; FXCW; Touring)
(except models with radio controls or cruise control)
Also fits aftermarket caliper that requires a 9/16" bore master cylinder.

€ 212,50
per set
*** AANBIEDING ***
006444 :  Mustang Handlebar Chrome 1-1/4 inch
1 1/4" O.D. steel handlebars provide a massive look with a style right out of the 1950's.
To keep the switch wires out of sight the bars have been dimpled like the 1982/Later OE bars) and slotted under the switch housing area so the wires can be run internally.
The brake side has been clearanced to be used with OE style master cylinders (all years including 1996/Later) and most custom brake master cylinders.
Knurled at the riser area to help prevent slippage.
Fits risers mounted on 3 1/2" centers.
Width: 36 1/2" ( 927 mm )
Rise: 4 3/4" ( 120 mm )
Pullback: 5" ( 127 mm )
Center Width: 9" ( 229 mm )
Normaal 167,50 nu
€ 102,50
*** AANBIEDING ***
006447 :  Broken Arrow Handlebar Chrome 1-1/4 inch
1 1/4" O.D. steel handlebar provides a massive look.
To keep the switch wires out of sight the bars have been dimpled (like the 1982/Later OE bars) and slotted under the switch housing area so the wires can be run internally.
The brake side has been clearanced to be used with OE style master cylinders (all years, including 1996/Later) and most custom brake master cylinders.
Risers are threaded 1/2-13 and mount on 3 1/2" centers.
Rise: 8" ( 203 mm )
Width: 32" ( 813 mm )
Pullback: 7 3/4" ( 197 mm )

€ 109,00
per stuk
*** AANBIEDING ***
005120 :  Rem/koppelings hendel ball end
Alu. polished replica van de befaamde hendel op de Panheads.
FL 1941-1971 Brake
FL 1954-1967 Clutch
Made in USA

€ 24,50
*** AANBIEDING ***
004686 :  Shorty Riser Kit 1¼ Stuur
Showchroom riserset voor 1¼ inch sturen.
1½ inch rise.
Past o.a op de 1¼ inch sturen van FXSTC 2006up.

€ 34,50
per set
*** AANBIEDING ***
001697 :  Handvaten Rail Rubber/Chroom
Dit set kost origineel Harley 85,00
( dan staat er alleen een HD logo op voor 55 euro meer ! )

Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft binnendiameter geschikt voor de kunststof of metalen gashuls ( rechts ).

€ 22,50
per set
*** AANBIEDING ***
005655 :  Handvaten Billet Diamond Style Chroom
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft geintrigeerde gashuls ( rechts ).

€ 37,50
per set
*** AANBIEDING ***
005656 :  Handvaten Billet Flame Style Chroom
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft geintrigeerde gashuls ( rechts ).

€ 37,50
per set
*** AANBIEDING ***
005654 :  Handvaten Billet Faceted Style Chroom
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft geintrigeerde gashuls ( rechts ).

€ 39,50
per set
*** AANBIEDING ***
007060 :  Skull & Flame Handgrip Set
A real addition to that custom bike.
If you are into skulls or flames this will really fit in.
This is a leather covered Comfort Touch™ grip with embossed flames and skull and cross bones.
The end caps feature chrome plated skulls with ruby eyes.
Fits : 1 inch ( 25,4mm ) handlebars.
All models with external throttle cable(s).
1 grip has inner diameter handlebar ( left ).
1 grip has inner diameter for plastic or metal throttle sleeve ( right ).

€ 69,00
per set
*** AANBIEDING ***
005062 :  Handvaten H.O.G. collection
Chroom/rubber set met H.O.G. embleem.
Extra dikke uitvoering 1,66 inch (42mm).
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft geintrigeerde gashuls ( rechts ).

€ 49,00
per set
*** AANBIEDING ***
004308 :  Handvaten Classic Wit
Classic style handvaten met chroom endplugs.
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft binnendiameter geschikt voor de kunststof of metalen gashuls ( rechts ).

€ 17,50
per set
*** AANBIEDING ***
004098 :  Throttle Assist
Simpel maar doeltreffend hulpstuk om het gasgeven wat te vergemakkelijken.
Op lange ritten biedt "the Throttle Assist" veel comfort want je hoeft het gashendel niet meer helemaal vast te houden.De hand rust met de muis op "the Throttle Assist" en de vingers zijn vrij.
Simpele montage.
USA made.

€ 8,50
per stuk
008797 :  Lever throttle screw black
An easy and cheap way to manual "Cruise Control" your throttle.
Lets you adjust tension on the throttle screw with your thumb without taking the hands from the handlebar.
Fits all models equiped with 74-up late style tension screw.
( sold separatly as kit ABS productcode 000851 )

€ 2,50
per stuk
008798 :  Lever throttle screw chrome
An easy and cheap way to manual "Cruise Control" your throttle.
Lets you adjust tension on the throttle screw with your thumb without taking the hands from the handlebar.
Fits all models equiped with 74-up late style tension screw.
( sold separatly as kit ABS productcode 000851 )

€ 3,50
per stuk
008701 :  Burly Apehanger Cable/Line kit
For 16 inch narrow bottom apes.
Single disc 07-13 XL Sportster.

€ 209,00
per kit
008957 :  Wild I Chubby Springer Bar 1-1/4 Black
Knuckle Style.
Fits all 88-13 H-D Springers.
2" Rise
36.5" Width
10.5" Center
8.5" Pullback
35° Wrist Angle

€ 243,50
per stuk
008956 :  Wild I Chubby Springer Bar 1-1/4 Chrome
Knuckle Style.
Fits all 88-13 H-D Springers.
2" Rise
36.5" Width
10.5" Center
8.5" Pullback
35° Wrist Angle

€ 243,50
per stuk
008955 :  Wild I Chubby Springer Bar 1-1/4 Black
FLSTS Style.
Fits all 88-13 H-D Springers.
4.5" Rise
34.5" Width
11" Center
12.5" Pullback
50° Wrist Angle

€ 243,50
per stuk
008954 :  Wild I Chubby Springer Bar 1-1/4 Chrome
FLSTS Style.
Fits all 88-13 H-D Springers.
4.5" Rise
34.5" Width
11" Center
12.5" Pullback
50° Wrist Angle

€ 243,50
per stuk
008700 :  RSD Vintage King Ape 1-1/8 Black 16 inch
1-1/8 inch ( 29mm ) thick.
16 inch ( 406mm ) rise.
Use with 1-piece riser top clamp.

€ 302,50
per stuk
008211 :  BMX Handlebar Gloss Black

€ 189,00
per stuk
008210 :  BMX Handlebar Chrome

€ 189,00
per stuk
008212 :  Speed-Up Handlebar Chrome

€ 265,00
per stuk
008213 :  Speed-Up Handlebar Gloss Black

€ 265,00
per stuk
008214 :  Speed-Up Handlebar Flat Black

€ 265,00
per stuk
008215 :  Speed-Down Handlebar Chrome

€ 265,00
per stuk
008216 :  Speed-Down Handlebar Gloss Black

€ 265,00
per stuk
008217 :  Speed-Down Handlebar Flat Black

€ 265,00
per stuk
006446 :  Rodeo Handlebar Chrome 1-1/4 inch
1 1/4" O.D. steel handlebars provide a massive look with a style right out of the 1950's.
To keep the switch wires out of sight the bars have been dimpled like the 1982/Later OE bars) and slotted under the switch housing area so the wires can be run internally.
The brake side has been clearanced to be used with OE style master cylinders (all years including 1996/Later) and most custom brake master cylinders.
Knurled at the riser area to help prevent slippage.
Fits risers mounted on 3 1/2" centers.
Width : 30" ( 762 mm )
Rise: 9" ( 229 mm )
Pullback: 6" ( 152 mm )
Center Width: 8½" ( 216 mm )

€ 177,50
004785 :  HD handlebar black 1 inch
OEM replacement for :
Dyna Lowrider 1993.
FLHTC-U 1993.
OEM 55937-92

€ 42,50
005605 :  Dragbar Square 70cm lang chroom
8 cm pullback.
17½ cm hoog.
13 cm breed onderaan binnenkant.
18 cm breed onderaan buitenkant.
Geen dimples, 1 inch dik.

€ 59,00
005834 :  Old-Skool Stuur Chroom
1 inch stuur zonder dimples.
Zie maten foto 2.
9 cm pullback.

€ 76,50
005833 :  Old-Skool Stuur Matzwart
1 inch stuur zonder dimples.
Zie maten foto 2.
9 cm pullback.

€ 76,50
006436 :  H-Bar Handlebar Black
Black; 1 inch; non dimpled.

€ 112,50
006437 :  H-Bar Handlebar Black
Black; 1 inch; dimpled.

€ 112,50
006435 :  H-Bar Handlebar Chrome
Chrome; 1 inch; dimpled.

€ 112,50
006434 :  H-Bar Handlebar Chrome
Chrome; 1 inch; non dimpled.

€ 112,50
004190 :  Frisco Handlebar Black
1 inch dik,non dimpled.
7 inch rise ( 18cm ).
USA made
Excl. risers die verder op in deze categorie staan.

€ 109,50
per stuk
006096 :  Tracker Handlebar Black
Zwart; 1 inch; non dimpled.
30 inch breed ( 75 cm )

€ 82,50
006097 :  Tracker Handlebar Black
Zwart; 1 inch; dimpled.
30 inch breed ( 75 cm )
82-09 alle modellen.
(Excl. 08-09 H-D E-Throttle & 88-09 Springers)

€ 82,50
006098 :  Tracker Handlebar Chrome
Chrome; 1 inch; non dimpled.
30 inch wide ( 75 cm

€ 82,50
per stuk
006099 :  Tracker Handlebar Chrome
Chrome; 1 inch; dimpled.
30 inch breed ( 75 cm )
82-09 alle modellen.
(Excl. 08-09 H-D E-Throttle & 88-09 Springers)

€ 82,50
005558 :  Low Drag Handlebar Black
Zwart; 1 inch; non dimpled.

€ 109,00
per stuk
005557 :  Low Drag Handlebar Black
Zwart; 1 inch; dimpled.
82-09 alle modellen.
(Excl. 08-09 H-D E-Throttle & 88-09 Springers)

€ 112,50
006359 :  Keystone Handlebar Chrome
Chrome; 1 inch; non dimpled.

€ 112,50
006355 :  Keystone Handlebar Black
Zwart; 1 inch; dimpled.
82-09 alle modellen.
(Excl. 08-09 H-D E-Throttle & 88-09 Springers)

€ 112,50
006358 :  Keystone Handlebar Black
Zwart; 1 inch; non dimpled.

€ 112,50
006360 :  Keystone Handlebar Chrome
Chrome; 1 inch; dimpled.
82-09 alle modellen.
(Excl. 08-09 H-D E-Throttle & 88-09 Springers)

€ 112,50
004699 :  Sportster style stuur pre 82
Chroom 70cm breed.
Zonder dimples.
1 inch.

€ 29,50
per stuk
001651 :  Sportster style stuur 82up
Chroom 70cm breed.
Met dimples.( uitsparingen voor bedrading )
1 inch.

€ 31,50
per stuk
002691 :  Z-Style stuur 1 inch
Chrome uitvoering.
Zonder dimples.
89 cm breed
10 cm hoog
11 cm pullback.

€ 109,00
003938 :  Fatbar Beach Style 1¼ inch
Super dik en robuust chroom stuur.
Zorgt voor een zeer goede zithouding en veel controle met rijden.
Kom gerust even langs om dit stuur beter te bekijken.
40 inch ( 100 cm ) breed.
3½ inch ( 9 cm ) rise.
12¾ inch ( 32½ cm ) pullback.
Met dimples en voorgeboorde gaten om bedrading door het stuur te voeren.

€ 132,50
009578 :  FEHLING 1 INCH DRAG BAR 72 CM WIDE
Pre-82, chrome, no dimples.

€ 56,23
Qty: 1
009579 :  FEHLING 1 INCH DRAG BAR 72 CM WIDE
82-up, chrome.
Note :
82-up denotes dimples in handlebars.
These will fit 82-up H-D (excl. 08-up elec. throttle and 88-11 Springers), unless specified otherwise..

€ 64,70
Qty:1
009577 :  FEHLING 1 INCH DRAG BAR 72 CM WIDE
82-up, black.
Note :
82-up denotes dimples in handlebars.
These will fit 82-up H-D (excl. 08-up elec. throttle and 88-11 Springers), unless specified otherwise..

€ 64,82
Qty: 1
009582 :  FEHLING 1 INCH DRAG BAR 82 CM WIDE
Pre-82, chrome, no dimples.

€ 59,30
Qty: 1
009583 :  FEHLING 1 INCH DRAG BAR 82 CM WIDE
82-up, chrome.
Note :
82-up denotes dimples in handlebars.
These will fit 82-up H-D (excl. 08-up elec. throttle and 88-11 Springers), unless specified otherwise..

€ 61,40
Qty: 1
009584 :  FEHLING 1 INCH DRAG BAR 82 CM WIDE
82-up, black.
Note :
82-up denotes dimples in handlebars.
These will fit 82-up H-D (excl. 08-up elec. throttle and 88-11 Springers), unless specified otherwise..

€ 64,50
Qty: 1
009581 :  FEHLING 1 INCH DRAG BAR 82 CM WIDE
82-up, chrome, 3-hole.
Note :
82-up denotes dimples in handlebars.
These will fit 82-up H-D (excl. 08-up elec. throttle and 88-11 Springers), unless specified otherwise..

€ 85,93
Qty: 1
009580 :  FEHLING 1 INCH DRAG BAR 82 CM WIDE
82-up, chrome, 4-hole.
Note :
82-up denotes dimples in handlebars.
These will fit 82-up H-D (excl. 08-up elec. throttle and 88-11 Springers), unless specified otherwise..

€ 120,07
Qty: 1
009586 :  FEHLING 1 INCH DRAG BAR 92 CM WIDE
Pre-82, chrome, no dimples.

€ 56,48
Qty: 1
009587 :  FEHLING 1 INCH DRAG BAR 92 CM WIDE
82-up, chrome.
Note :
82-up denotes dimples in handlebars.
These will fit 82-up H-D (excl. 08-up elec. throttle and 88-11 Springers), unless specified otherwise..

€ 71,70
Qty: 1
009589 :  FEHLING 1 INCH DRAG BAR 92 CM WIDE
82-up, black.
Note :
82-up denotes dimples in handlebars.
These will fit 82-up H-D (excl. 08-up elec. throttle and 88-11 Springers), unless specified otherwise..

€ 72,44
Qty: 1
009588 :  FEHLING 1 INCH DRAG BAR 92 CM WIDE
82-up, chrome, 3-hole.
Note :
82-up denotes dimples in handlebars.
These will fit 82-up H-D (excl. 08-up elec. throttle and 88-11 Springers), unless specified otherwise..

€ 101,82
Qty: 1
009585 :  FEHLING 1 INCH DRAG BAR 92 CM WIDE
82-up, chrome, 4-hole.
Note :
82-up denotes dimples in handlebars.
These will fit 82-up H-D (excl. 08-up elec. throttle and 88-11 Springers), unless specified otherwise..

€ 132,00
Qty: 1
009590 :  FEHLING 1 INCH DRAG BAR 98 CM WIDEBAR
Pre-82, chrome, no dimples.

€ 56,48
Qty: 1
009591 :  FEHLING 1 INCH DRAG BAR 98 CM WIDE
82-up, chrome.
Note :
82-up denotes dimples in handlebars.
These will fit 82-up H-D (excl. 08-up elec. throttle and 88-11 Springers), unless specified otherwise..

€ 62,24
Qty: 1
005593 :  Dragbar 80cm lang chroom 82up
Chroom; 1 inch; dimpled.
165mm pullback.
82-09 alle modellen.
(Excl. 08-09 H-D E-Throttle & 88-09 Springers)

€ 39,00
004819 :  Dragbar 102½ cm lang chroom 82up
10 cm pullback, no rise.
Met dimples, 1 inch dik.

€ 42,50
004818 :  Dragbar 90cm lang chroom pre 82
17 cm pullback, geen dimples.
1 inch.

€ 32,50
006490 :  Dragbar 90cm lang chroom 82up
17 cm pullback.
Chroom; 1 inch; dimpled.
82-09 alle modellen.
(Excl. 08-09 H-D E-Throttle & 88-09 Springers)

€ 39,00
001652 :  Roadstar stuur medium
CHROOM; DIMPLES; 1 INCH
830MM WIDE
260MM HIGH
150MM PULLBACK
260MM CENTER WIDTH
HARLEY-DAVIDSON > 82-09
(EXCL. 08-09 H-D E-THROTTLE & 88-09 SPRINGERS)

€ 52,50
004039 :  MCS 981213 TRW Flyer Bar
Zie foto voor verdere produktomschrijving.

€ 52,50
001650 :  Roadstar stuur Wide
CHROOM; DIMPLES; 1 INCH
940MM WIDE
85MM HIGH
185MM PULLBACK
220MM CENTER WIDTH
Fits: HARLEY-DAVIDSON > 82-09
(EXCL. 08-09 H-D E-THROTTLE & 88-09 SPRINGERS)

€ 55,00
per stuk
005321 :  Tomahawk Z-Style stuur 1 inch
Chroom uitvoering.
Zonder dimples.
77½ cm breed
6½ cm hoog
20 cm pullback.
19 cm center.

€ 82,50
007079 :  Cruiser Style Handlebar 1-1/4 inch
Give your bike the burly look with a set of these oversize handlebars.
The handlebars are 1 1/4" O.D. in diameter and feature conventional 1" mounting and handlebar control area.
To keep the switch wires out of sight the bars have beenvslotted under the switch housing area so the wires can be run internally.
The brake side has been clearanced to be used with OE style master cylinders (all years, including 1996/Later) and most custom brake master cylinders.
Knurled at the riser area to help prevent slippage.
Fits risers mounted on 3 1/2" centers.
Rise: 4" ( 10 cm )
Width: 36" ( 91,5 cm )
Center Width: 13 3/4" ( 35 cm )
Pullback: 10 3/4" ( 27,3 cm )

€ 122,50
000572 :  Burly Classic Bar 1¼ inch
Chrome; Dimples; Smooth Taperd.
Height: 1"
Width: 36"
Pull Back: 7.75"
Center Width: 10.5"
Bar is 1" dia at the grips and clamp areas.
The right bend for maximum comfort and control.
OEM control cables can be re-used but may require longer cables and extension of handlebar wiring.( depending on model )
Fits: HARLEY-DAVIDSON > 82-11.
(EXCL. SPRINGERS & FLT WITH ELECTRONIC THROTTLE)

€ 198,50
006222 :  FLH Dresser Style stuur
Replica stuur van de FLH Shovelheads.
Geen dimples.
Breed 37 inch ( 94cm )
Rise 6½ inch ( 16½ cm )
Pullback 12 inch ( 30½ cm )
1 inch.

€ 34,50
004727 :  Apehanger Super Small 1 inch
End rise 9½ inch ( 24cm ).
Breed 27½ inch ( 70cm ).
Center breedte 43/4 inch ( 12cm ).
Pull back 9½ inch ( 24cm ).
Met dimples dus ook geschikt voor 82up controls.

€ 47,50
004832 :  Apehanger Small 1 inch
End rise 10 inch ( 25cm ).
Breed 32½ inch ( 82½cm ).
Center breedte 8 inch ( 20cm ).
Pull back 7 inch ( 18cm ).
Zonder dimples.

€ 33,50
002136 :  Apehanger Small 1 inch
End rise 10 inch ( 25cm ).
Breed 32½ inch ( 82½cm ).
Center breedte 8 inch ( 20cm ).
Pull back 7 inch ( 18cm ).
Met dimples dus ook geschikt voor 82up controls.

€ 34,50
002137 :  Apehanger Medium 1 inch
End rise 12 inch ( 30½cm ).
Breed 34½ inch ( 87½cm ).
Center breedte 8 inch ( 20cm ).
Pull back 7 inch ( 18cm ).
Met dimples dus ook geschikt voor 82up controls.

€ 39,50
per stuk
009597 :  Apehanger Medium 1 inch
End rise 12 inch ( 30½cm ).
Breedte 34½ inch ( 87½cm ).
Center breedte 8 inch ( 20cm ).
Pull back 7 inch ( 18cm ).
No dimples.

€ 42,50
per stuk
001649 :  Apehanger Medium 1 inch
Paughco USA made stuur.
End rise 13 inch ( 33cm ).
Breed 34¼ inch ( 87cm ).
Center breedte 8 inch ( 20cm ).
Pull back 11 inch ( 28cm ).
Met dimples dus ook geschikt voor 82up controls.

€ 149,00
000973 :  Apehanger High 1 inch
End rise 16 inch ( 41cm ).
Breed 35 inch ( 89cm ).
Center breedte 8 inch ( 20cm ).
Pull back 7 inch ( 18cm ).
Met dimples dus ook geschikt voor 82up controls.

€ 47,50
per stuk
002703 :  Apehanger 1¼ dik 20 inch rise
USA made stuur 20 inch rise.
Voorzien van sparingen om o.a bedrading door te voeren.

€ 275,00
002704 :  Apehanger 1¼ dik 20 inch rise
USA made stuur 20 inch rise.
Voorzien van sparingen om o.a bedrading door te voeren.

€ 275,00
008412 :  T-Bar chrome 1-1/4 inch ( 32mm ) 4 inch
End rise : 10 cm (4")
Width : 76 cm (30")
Center width : 23 cm (9")
Pullback : 15 cm (6")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 195,00
per stuk
008413 :  T-Bar chrome 1-1/4 inch ( 32mm ) 6 inch
End rise : 21,5 cm (8,5")
Width : 76 cm (30")
Center width : 23 cm (9")
Pullback : 19,5 cm (7,75")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 195,00
per stuk
008414 :  T-Bar Radius chrome 1-1/4 inch ( 32mm ) 6 inch
End rise : 15 cm (6")
Width : 79 cm (31")
Center width : 23 cm (9")
Pullback : 15 cm (6")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 204,50
per stuk
008415 :  T-Bar chrome 1-1/4 inch ( 32mm ) 8 inch
End rise : 25 cm (9,75")
Width : 76 cm (30")
Center width : 23 cm (9")
Pullback : 21 cm (8,25")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 195,00
per stuk
008416 :  T-Bar Radius chrome 1-1/4 inch ( 32mm ) 8 inch
End rise : 22,5 cm (8")
Width : 79 cm (31")
Center width : 23 cm (9")
Pullback : 18 cm (7")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 204,50
per stuk
008417 :  T-Bar chrome 1-1/4 inch ( 32mm ) 8 inch
Straight Risers.
End rise : 32 cm (12,5")
Width : 79 cm (31")
Center width : 21,5 cm (8,5")
Pullback : 15 cm (5,875")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 185,00
per stuk
008418 :  T-Bar chrome 1-1/4 inch ( 32mm ) 10 inch
End rise : 30,5 cm (12")
Width : 76 cm (30")
Center width : 23 cm (9")
Pullback : 21,5 cm (8,5")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 197,50
per stuk
008419 :  T-Bar chrome 1-1/4 inch ( 32mm ) 10 inch
Straigth Risers.
End rise : 37 cm (14,5")
Width : 79 cm (31")
Center width : 21,5 cm (8,5")
Pullback : 15 cm (5,875")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 185,00
per stuk
008420 :  T-Bar chrome 1-1/4 inch ( 32mm ) 12 inch
End rise : 30,5 cm (12")
Width : 73,5 cm (29")
Center width : 23 cm (9")
Pullback : 12,5 cm (5")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 204,50
per stuk
008421 :  T-Bar chrome 1-1/4 inch ( 32mm ) 14 inch
End rise : 35,5 cm (14")
Width : 73,5 cm (29")
Center width : 23 cm (9")
Pullback : 12,5 cm (5")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 217,50
per stuk
008422 :  T-Bar chrome 1-1/4 inch ( 32mm ) 16 inch
End rise : 40,5 cm (16")
Width : 73,5 cm (29")
Center width : 23 cm (9")
Pullback : 12,5 cm (5")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 232,50
per stuk
008424 :  Drag-Bar chrome 1-1/4 inch ( 32mm ) Springer
End rise : -
Width : 79 cm (31")
Center width : 21,5 cm (8,5")
Pullback : 15 cm (6")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 117,50
per stuk
008423 :  Drag-Bar chrome 1-1/4 inch ( 32mm )
End rise : -
Width : 79 cm (31")
Center width : 21,5 cm (8,5")
Pullback : 15 cm (6")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 119,00
per stuk
008426 :  Bagger-Style chrome 1-1/4 inch ( 32mm )
End rise : 11,5 cm (4,5")
Width : 88 cm (34,5")
Center width : 26,5 cm (10,5")
Pullback : 32 cm (12,5")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 189,00
per stuk
008425 :  Classic-Style chrome 1-1/4 inch ( 32mm )
End rise : 51mm (2")
Width : 93 cm (36,5")
Center width : 26,5 cm (10,5")
Pullback : 21,5 cm (8,5")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 189,00
per stuk
008427 :  Bagger-Style chrome 1-1/4 inch ( 32mm )
For Road King/Road Glide.
End rise : 14 cm (5,5")
Width : 83 cm (32,5")
Center width : 26,5 cm (10,5")
Pullback : 40,5 cm (16")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 192,50
per stuk
008428 :  Bagger-Style II chrome 1-1/4 inch ( 32mm )
For Road King/Road Glide.
End rise : 10,5 cm (4,125")
Width : 86 cm (34")
Center width : 26,5 cm (10,5")
Pullback : 33 cm (13")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 185,00
per stuk
008429 :  Bagger-Style Ape Hanger chrome 1-1/4 inch ( 32mm )
End rise : 25,5 cm (10")
Width : 89 cm (35,125")
Center width : 25,5 cm (10")
Pullback : 20,5 cm (8")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 185,00
per stuk
008430 :  Ape Hanger chrome 1-1/4 inch ( 32mm ) 8,5 inch
End rise : 21,5 cm (8,5")
Width : 95 cm (30")
Center width : 29 cm (11,5")
Pullback : 25,5 cm (10")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 197,50
per stuk
008431 :  Ape Hanger chrome 1-1/4 inch ( 32mm ) 9,5 inch
For Springer.
End rise : 24 cm (9,5")
Width : 91 cm (36")
Center width : 30,5 cm (12")
Pullback : 25,5 cm (10")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 202,50
per stuk
008446 :  Ape Hanger Gloss Black 1-1/4 inch ( 32mm ) 10 inch
End rise : 25,5 cm (10")
Width : 99 cm (39")
Center width : 29 cm (11,5")
Pullback : 25,5 cm (10")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 195,00
per stuk
008432 :  Ape Hanger chrome 1-1/4 inch ( 32mm ) 10 inch
End rise : 25,5 cm (10")
Width : 99 cm (39")
Center width : 29 cm 11,5")
Pullback : 25,5 cm (10")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 198,50
per stuk
008433 :  Ape Hanger chrome 1-1/4 inch ( 32mm ) 12,5 inch
End rise : 32 cm (12,5")
Width : 91 cm (36")
Center width : 26,5 cm (10,5")
Pullback : 30,5 cm (12")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 192,50
per stuk
008447 :  Ape Hanger Gloss Black 1-1/4 inch (32mm)12,5 inch
End rise : 32 cm (12,5")
Width : 91 cm (36")
Center width : 26,5 cm (10,5")
Pullback : 30,5 cm (12")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 195,00
per stuk
008435 :  Ape Hanger chrome 1-1/4 inch ( 32mm ) 12,5 inch
For Springer.
End rise : 32 cm (12,5")
Width : 98 cm (38,5")
Center width : 30,5 cm (12")
Pullback : 30,5 cm (12")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 214,50
per stuk
008448 :  Ape Hanger Gloss Black 1-1/4 inch ( 32mm ) 14 inch
End rise : 38 cm (15")
Width : 99 cm (39")
Center width : 25,5 cm (10")
Pullback : 28 cm (11")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 198,50
per stuk
008434 :  Ape Hanger chrome 1-1/4 inch ( 32mm ) 14 inch
End rise : 35,5 cm (14")
Width : 99 cm (39")
Center width : 25,5 cm (10")
Pullback : 28 cm (11")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 198,50
per stuk
008436 :  Ape Hanger chrome 1-1/4 inch ( 32mm ) 16 inch
End rise : 40,5 cm (16")
Width : 103 cm (40,5")
Center width : 28 cm (11")
Pullback : 25,5 cm (10")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 205,00
per stuk
008437 :  Ape Hanger chrome 1-1/4 inch ( 32mm ) 16 inch
For Springer.
End rise : 40,5 cm (16")
Width : 103 cm (40,5")
Center width : 28 cm (11")
Pullback : 26,5 cm (10,5")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 212,50
per stuk
004097 :  Ape Hanger chrome 1-1/4 inch ( 32mm ) 16 inch
End rise : 40,5 cm (16")
Width : 89 cm (35")
Center width : 23 cm (9")
Pullback : 23 cm (9")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
Made in Taiwan.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 139,00
per stuk
008449 :  Ape Hanger Gloss Black 1-1/4 inch ( 32mm ) 16 inch
End rise : 40,5 cm (16")
Width : 100 cm (39,5")
Center width : 29 cm (11,5")
Pullback : 25,5 cm (10")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 197,50
per stuk
008450 :  Ape Hanger Gloss Black 1-1/4 inch ( 32mm ) 18 inch
End rise : 45,5 cm (18")
Width : 94 cm (37")
Center width : 30,5 cm (12")
Pullback : 20,5 cm (8")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 198,50
per stuk
008438 :  Ape Hanger chrome 1-1/4 inch ( 32mm ) 18 inch
End rise : 45,5 cm (18")
Width : 94 cm (37")
Center width : 30,5 cm (12")
Pullback : 20,5 cm (8")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 209,00
per stuk
008439 :  Ape Hanger chrome 1-1/4 inch ( 32mm ) 19,5 inch
For Springer.
End rise : 49,5 cm (19,5")
Width : 103 cm (40,5")
Center width : 28 cm (11")
Pullback : 26,5 cm (10,5")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 212,50
per stuk
008440 :  Ape Hanger chrome 1-1/4 inch ( 32mm ) 20 inch
End rise : 51 cm (20")
Width : 97 cm (38")
Center width : 30,5 cm (12")
Pullback : 20,5 cm (8")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 215,00
per stuk
008451 :  Ape Hanger Gloss Black 1-1/4 inch ( 32mm ) 20 inch
End rise : 51 cm (20")
Width : 97 cm (38")
Center width : 30,5 cm (12")
Pullback : 20,5 cm (8")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 199,50
per stuk
008441 :  Road King Style chrome 1-1/4 inch ( 32mm )
End rise : 14,5 cm (5,75")
Width : 88 cm (34,5")
Center width : 24 cm (9,5")
Pullback : 28 cm (11")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 193,50
per stuk
008442 :  Beach Bar chrome 1-1/4 inch ( 32mm )
End rise : 76 mm (3")
Width : 90 cm (35,5")
Center width : 24 cm (9,5")
Pullback : 38 cm (15")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 192,50
per stuk
008443 :  Beach Bar chrome 1-1/4 inch ( 32mm )
For Springer.
End rise : 76 mm (3")
Width : 100 cm (39,5")
Center width : 26,5 cm (10,5")
Pullback : 43 cm (16,875")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 198,50
per stuk
008444 :  Stick Bar chrome 1-1/4 inch ( 32mm )
End rise : -
Width : 76 cm (30")
Center width : -
Pullback : -
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 87,50
per stuk
008445 :  Riser Drag Bar chrome 1-1/4 inch ( 32mm )
End rise : 25,5 cm (10")
Width : 79 cm (31")
Center width : 21,5 cm (8,5")
Pullback : 33 cm (13")
•The ultimate 32 mm (1-1/4”) diameter handlebar, designed for maximum comfort.
•Dimpled and drilled for internal wires; works with standard controls.
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
NOTE: Compatible with hydraulic clutch controls.

€ 198,50
per stuk
008396 :  Riser stud set Springer Fork
Chrome steel riser studs.
88‑06 FXSTS Softail Springer.

€ 33,50
per paar
002487 :  Riser cover Koeienkop Alu.
Alu.polished cover FL/FLH 60-85 4speed.

€ 17,50
002488 :  Riser cover Koeienkop Chr.
Chroom cover FL/FLH 60-85 4speed.

€ 19,50
002486 :  Riser cover Nacelle
Chroom cover voor o.a de Softail Heritage & Fatboy 86up modellen waar een koplamphuis model "koeienkop" is gemonteerd.

€ 67,50
003547 :  Riser top clamp smooth
Chroom staal stuurklem.

€ 11,50
per stuk
003548 :  Riser top clamp finned
Chroom staal finned.

€ 12,50
per stuk
005529 :  Riser top clamp Eagle Spirit
Chroom staal Eagle Spirit collectie.

€ 27,50
per stuk
000593 :  Riserset chroom recht 1-3/4 inch
OEM style riser set recht.
1-3/4 inch rise
Geen draad maar wordt bevestigd met 1/2 inch 6kant bout + moer.
( indien nodig apart te bestellen )
Dit set past onder de handlebar cover op het koplamphuis van o.a de FLH modellen 4 speed.

€ 26,50
per paar
008632 :  Riserset chroom recht 1,7 inch
FORGED ALUMINUM RISERS
OEM style riser set straight.
1,7 inch rise ( 43mm )
•These risers are forged from 6061-T6 aluminum for superior strength.
•Drilled and tapped for 1/2”-13 riser bolts.
(bolts sold separately)
•CNC-machined for precision fit on handlebars with a 25 mm (1”) diameter clamping area.
•Designed to fit applications with 89 mm (3.5”) on-center mounts and will accept most OEM-style top clamps.

€ 32,50
per paar
004000 :  Riserset chroom recht 2 inch
FORGED ALUMINUM RISERS
OEM style riser set straight.
2 inch rise ( 50mm )
•These risers are forged from 6061-T6 aluminum for superior strength.
•Drilled and tapped for 1/2”-13 riser bolts.
(bolts sold separately)
•CNC-machined for precision fit on handlebars with a 25 mm (1”) diameter clamping area.
•Designed to fit applications with 89 mm (3.5”) on-center mounts and will accept most OEM-style top clamps.

€ 26,50
per paar
008633 :  Riserset chroom recht 3,5 inch
FORGED ALUMINUM RISERS
OEM style riser set straight.
3,5 inch rise ( 89mm )
•These risers are forged from 6061-T6 aluminum for superior strength.
•Drilled and tapped for 1/2”-13 riser bolts.
(bolts sold separately)
•CNC-machined for precision fit on handlebars with a 25 mm (1”) diameter clamping area.
•Designed to fit applications with 89 mm (3.5”) on-center mounts and will accept most OEM-style top clamps.

€ 47,50
per paar
003583 :  Riserset chroom recht 4,5 inch
FORGED ALUMINUM RISERS
OEM style riser set straight.
4,5 inch rise ( 114mm )
•These risers are forged from 6061-T6 aluminum for superior strength.
•Drilled and tapped for 1/2”-13 riser bolts.
(bolts sold separately)
•CNC-machined for precision fit on handlebars with a 25 mm (1”) diameter clamping area.
•Designed to fit applications with 89 mm (3.5”) on-center mounts and will accept most OEM-style top clamps.

€ 32,50
per paar
008634 :  Riserset chroom recht 5,5 inch
FORGED ALUMINUM RISERS
OEM style riser set straight.
5,5 inch rise ( 140mm )
•These risers are forged from 6061-T6 aluminum for superior strength.
•Drilled and tapped for 1/2”-13 riser bolts.
(bolts sold separately)
•CNC-machined for precision fit on handlebars with a 25 mm (1”) diameter clamping area.
•Designed to fit applications with 89 mm (3.5”) on-center mounts and will accept most OEM-style top clamps.

€ 57,50
per paar
008635 :  Riserset chroom recht 6,5 inch
FORGED ALUMINUM RISERS
OEM style riser set straight.
6,5 inch rise ( 165mm )
•These risers are forged from 6061-T6 aluminum for superior strength.
•Drilled and tapped for 1/2”-13 riser bolts.
(bolts sold separately)
•CNC-machined for precision fit on handlebars with a 25 mm (1”) diameter clamping area.
•Designed to fit applications with 89 mm (3.5”) on-center mounts and will accept most OEM-style top clamps.

€ 62,50
per paar
008636 :  Riserset chroom recht 8 inch
FORGED ALUMINUM RISERS
OEM style riser set straight.
8 inch rise ( 205mm )
•These risers are forged from 6061-T6 aluminum for superior strength.
•Drilled and tapped for 1/2”-13 riser bolts.
(bolts sold separately)
•CNC-machined for precision fit on handlebars with a 25 mm (1”) diameter clamping area.
•Designed to fit applications with 89 mm (3.5”) on-center mounts and will accept most OEM-style top clamps.

€ 71,50
per paar
008230 :  Riserset zwart recht 1,7 inch
FORGED ALUMINUM RISERS
OEM style riser set straight.
1,7 inch rise ( 43mm )
•These risers are forged from 6061-T6 aluminum for superior strength.
•Drilled and tapped for 1/2”-13 riser bolts.
(bolts sold separately)
•CNC-machined for precision fit on handlebars with a 25 mm (1”) diameter clamping area.
•Designed to fit applications with 89 mm (3.5”) on-center mounts and will accept most OEM-style top clamps.

€ 32,50
per paar
008037 :  Riserset zwart recht 2 inch
FORGED ALUMINUM RISERS
OEM style riser set straight.
2 inch rise ( 50mm )
•These risers are forged from 6061-T6 aluminum for superior strength.
•Drilled and tapped for 1/2”-13 riser bolts.
(bolts sold separately)
•CNC-machined for precision fit on handlebars with a 25 mm (1”) diameter clamping area.
•Designed to fit applications with 89 mm (3.5”) on-center mounts and will accept most OEM-style top clamps.

€ 29,00
per paar
008637 :  Riserset zwart recht 3,5 inch
FORGED ALUMINUM RISERS
OEM style riser set straight.
3,5 inch rise ( 89mm )
•These risers are forged from 6061-T6 aluminum for superior strength.
•Drilled and tapped for 1/2”-13 riser bolts.
(bolts sold separately)
•CNC-machined for precision fit on handlebars with a 25 mm (1”) diameter clamping area.
•Designed to fit applications with 89 mm (3.5”) on-center mounts and will accept most OEM-style top clamps.

€ 45,00
per paar
008638 :  Riserset zwart recht 5,5 inch
FORGED ALUMINUM RISERS
OEM style riser set straight.
5,5 inch rise ( 140mm )
•These risers are forged from 6061-T6 aluminum for superior strength.
•Drilled and tapped for 1/2”-13 riser bolts.
(bolts sold separately)
•CNC-machined for precision fit on handlebars with a 25 mm (1”) diameter clamping area.
•Designed to fit applications with 89 mm (3.5”) on-center mounts and will accept most OEM-style top clamps.

€ 52,50
per paar
008639 :  Riserset zwart recht 6,5 inch
FORGED ALUMINUM RISERS
OEM style riser set straight.
6,5 inch rise ( 165mm )
•These risers are forged from 6061-T6 aluminum for superior strength.
•Drilled and tapped for 1/2”-13 riser bolts.
(bolts sold separately)
•CNC-machined for precision fit on handlebars with a 25 mm (1”) diameter clamping area.
•Designed to fit applications with 89 mm (3.5”) on-center mounts and will accept most OEM-style top clamps.

€ 57,50
per paar
008640 :  Riserset zwart recht 8 inch
FORGED ALUMINUM RISERS
OEM style riser set straight.
8 inch rise ( 205mm )
•These risers are forged from 6061-T6 aluminum for superior strength.
•Drilled and tapped for 1/2”-13 riser bolts.
(bolts sold separately)
•CNC-machined for precision fit on handlebars with a 25 mm (1”) diameter clamping area.
•Designed to fit applications with 89 mm (3.5”) on-center mounts and will accept most OEM-style top clamps.

€ 67,50
per paar
008661 :  Riserset chroom pullback 3,5 inch
FORGED ALUMINUM RISERS
OEM style riser set pullback 1 inch ( 25mm ).
3,5 inch rise ( 89mm )
•These risers are forged from 6061-T6 aluminum for superior strength.
•Drilled and tapped for 1/2”-13 riser bolts.
(bolts sold separately)
•CNC-machined for precision fit on handlebars with a 25 mm (1”) diameter clamping area.
•Designed to fit applications with 89 mm (3.5”) on-center mounts and will accept most OEM-style top clamps.

€ 45,00
per paar
000982 :  Riserset chroom pullback 4,5 inch
FORGED ALUMINUM RISERS
OEM style riser set pullback 1 inch ( 25mm ).
4,5 inch rise ( 114mm )
•These risers are forged from 6061-T6 aluminum for superior strength.
•Drilled and tapped for 1/2”-13 riser bolts.
(bolts sold separately)
•CNC-machined for precision fit on handlebars with a 25 mm (1”) diameter clamping area.
•Designed to fit applications with 89 mm (3.5”) on-center mounts and will accept most OEM-style top clamps.

€ 32,50
per paar
008662 :  Riserset chroom pullback 5,5 inch
FORGED ALUMINUM RISERS
OEM style riser set pullback 1 inch ( 25mm ).
5,5 inch rise ( 140mm )
•These risers are forged from 6061-T6 aluminum for superior strength.
•Drilled and tapped for 1/2”-13 riser bolts.
(bolts sold separately)
•CNC-machined for precision fit on handlebars with a 25 mm (1”) diameter clamping area.
•Designed to fit applications with 89 mm (3.5”) on-center mounts and will accept most OEM-style top clamps.

€ 52,50
per paar
008663 :  Riserset chroom pullback 6,5 inch
FORGED ALUMINUM RISERS
OEM style riser set pullback 1 inch ( 25mm ).
6,5 inch rise ( 165mm )
•These risers are forged from 6061-T6 aluminum for superior strength.
•Drilled and tapped for 1/2”-13 riser bolts.
(bolts sold separately)
•CNC-machined for precision fit on handlebars with a 25 mm (1”) diameter clamping area.
•Designed to fit applications with 89 mm (3.5”) on-center mounts and will accept most OEM-style top clamps.

€ 57,50
per paar
008664 :  Riserset chroom pullback 8,5 inch
FORGED ALUMINUM RISERS
OEM style riser set pullback 1 inch ( 25mm ).
8,5 inch rise ( 215mm )
•These risers are forged from 6061-T6 aluminum for superior strength.
•Drilled and tapped for 1/2”-13 riser bolts.
(bolts sold separately)
•CNC-machined for precision fit on handlebars with a 25 mm (1”) diameter clamping area.
•Designed to fit applications with 89 mm (3.5”) on-center mounts and will accept most OEM-style top clamps.

€ 67,50
per paar
008665 :  Riserset zwart pullback 3,5 inch
FORGED ALUMINUM RISERS
OEM style riser set pullback 1 inch ( 25mm ).
3,5 inch rise ( 89mm )
•These risers are forged from 6061-T6 aluminum for superior strength.
•Drilled and tapped for 1/2”-13 riser bolts.
(bolts sold separately)
•CNC-machined for precision fit on handlebars with a 25 mm (1”) diameter clamping area.
•Designed to fit applications with 89 mm (3.5”) on-center mounts and will accept most OEM-style top clamps.

€ 45,00
per paar
008666 :  Riserset zwart pullback 4,5 inch
FORGED ALUMINUM RISERS
OEM style riser set pullback 1 inch ( 25mm ).
4,5 inch rise ( 115mm )
•These risers are forged from 6061-T6 aluminum for superior strength.
•Drilled and tapped for 1/2”-13 riser bolts.
(bolts sold separately)
•CNC-machined for precision fit on handlebars with a 25 mm (1”) diameter clamping area.
•Designed to fit applications with 89 mm (3.5”) on-center mounts and will accept most OEM-style top clamps.

€ 48,50
per paar
008667 :  Riserset zwart pullback 5,5 inch
FORGED ALUMINUM RISERS
OEM style riser set pullback 1 inch ( 25mm ).
5,5 inch rise ( 140mm )
•These risers are forged from 6061-T6 aluminum for superior strength.
•Drilled and tapped for 1/2”-13 riser bolts.
(bolts sold separately)
•CNC-machined for precision fit on handlebars with a 25 mm (1”) diameter clamping area.
•Designed to fit applications with 89 mm (3.5”) on-center mounts and will accept most OEM-style top clamps.

€ 54,50
per paar
008668 :  Riserset zwart pullback 6,5 inch
FORGED ALUMINUM RISERS
OEM style riser set pullback 1 inch ( 25mm ).
6,5 inch rise ( 165mm )
•These risers are forged from 6061-T6 aluminum for superior strength.
•Drilled and tapped for 1/2”-13 riser bolts.
(bolts sold separately)
•CNC-machined for precision fit on handlebars with a 25 mm (1”) diameter clamping area.
•Designed to fit applications with 89 mm (3.5”) on-center mounts and will accept most OEM-style top clamps.

€ 58,50
per paar
008669 :  Riserset zwart pullback 8,5 inch
FORGED ALUMINUM RISERS
OEM style riser set pullback 1 inch ( 25mm ).
8,5 inch rise ( 215mm )
•These risers are forged from 6061-T6 aluminum for superior strength.
•Drilled and tapped for 1/2”-13 riser bolts.
(bolts sold separately)
•CNC-machined for precision fit on handlebars with a 25 mm (1”) diameter clamping area.
•Designed to fit applications with 89 mm (3.5”) on-center mounts and will accept most OEM-style top clamps.

€ 67,50
per paar
003549 :  Riser set chroom incl.topclamp smooth
OEM style die-cast pullback riser set.
4½ inch rise, 1 inch pullback.
½ UNC draad.
Incl. smooth topclamp.

€ 42,50
per set
001296 :  Riserset Early-Style 3 inch
Chroom stalen uitvoering.
3 inch rise, ½ UNC draad.

€ 55,00
per set
003582 :  Riserset chroom 4 inch
Chroom stalen uitvoering.
4 inch rise, ½ UNF draad.

€ 59,00
per set
004817 :  Riserset chroom 4 inch
Chroom stalen uitvoering.
Smooth top, verdekte bevestiging.
4 inch rise, ½ UNF draad.

€ 59,00
per set
003544 :  Shorty Riser set chroom 1 inch
Ultra lage risers 1 inch rise, staal verchroomd.
½" UNC draad.

€ 62,50
per set
003925 :  Riser set Gatling Style 2 inch
Stijvol chroom riserset Old-School.
2 inch ( 5cm ) rise.
Draadaansluiting : ½ x UNF

€ 82,50
per set
003581 :  Riserset chroom 6 inch
Chroom stalen uitvoering.
6 inch rise, ½ UNF draad.

€ 87,50
per set
004478 :  Offset risers 1½ inch rise
Robuuste showchrome Old-School riserset voor 1 inch sturen.
1½ inch rise ( 38mm ), ½ inch offset ( 12,7mm ).
Draadaansluiting ½ UNC.

€ 97,50
per set
003545 :  Fat Riser set chroom
Mooi dik massief riser set.
5" rise, incl.topclamp.
Stuur valt 1½ cm terug naar achteren.
Past o.a op de FXDF 2008 up.
½ UNC draadgaten.
Uiteraard ook op andere modellen toepasbaar.

€ 102,50
per set
000815 :  Riser set Alu. Smooth Top
Polished Alu.
Smooth top.
3" rise.

€ 112,50
per set
002489 :  Dogbone Risers
3 inch hoog.
Passen op 1 inch (25,4mm) sturen.

€ 169,00
per set
004191 :  Slimline Risers Black
Stainless steel.
1 inch sturen.
1¼ inch rise ( 32mm )

€ 98,50
per set
006258 :  Biltwell Thunder Risers Black
A blast in stainless riser design from the Good 'Ol Boys of Biltwell.
Thunder risers take all 1 inch diameter bars, give a 1 3/4 inch rise and work with all triple trees with a 3.5 inch spacing between the mounting bolts and this will fit most H-D models and customs with 1 inch handlebars.

€ 139,00
006259 :  Biltwell Thunder Risers Polished
A blast in stainless riser design from the Good 'Ol Boys of Biltwell.
Thunder risers take all 1 inch diameter bars, give a 1 3/4 inch rise and work with all triple trees with a 3.5 inch spacing between the mounting bolts and this will fit most H-D models and customs with 1 inch handlebars.

€ 139,00
006292 :  Riser set Springer voorvork 3 inch
Chroom set risers 3 inch ( 7½ cm )
Incl. 1/2 UNF imbusbouten en vulringen.

€ 62,50
per set
005526 :  Riser set Springer voorvork 4 inch
Chroom set risers 4 inch ( 10 cm )
Incl. 1/2 UNF imbusbouten en vulringen.

€ 67,50
per set
006293 :  Riser set Springer voorvork 5 inch
Chroom set risers 5 inch ( 12½ cm )
Incl. 1/2 UNF imbusbouten en vulringen.

€ 72,50
per set
006294 :  Riser set Springer voorvork 6 inch
Chroom set risers 6 inch ( 15 cm )
Incl. 1/2 UNF imbusbouten en vulringen.

€ 74,50
per set
006295 :  Riser set Springer voorvork 8 inch
Chroom set risers 8 inch ( 20 cm )
Incl. 1/2 UNF imbusbouten en vulringen.

€ 87,50
per set
006296 :  Riser set Springer voorvork 10 inch
Chroom set risers 10 inch ( 25 cm )
Incl. 1/2 UNF imbusbouten en vulringen.

€ 92,50
per set
006297 :  Riser set Springer voorvork 12 inch
Chroom set risers 12 inch ( 30 cm )
Incl. 1/2 UNF imbusbouten en vulringen.

€ 115,00
per set
008242 :  Riser top clamp Zwart
Gladde cover zonder "skirt".
( excl. bouten )

€ 11,50
per stuk
008243 :  Riser top clamp Zwart
Finned cover zonder "skirt".
( excl. bouten )

€ 13,00
per stuk
008244 :  Riser top clamp Zwart
Gladde cover met "skirt".
( excl. bouten )

€ 13,00
per stuk
008245 :  Riser top clamp Zwart
Scalloped cover zonder "skirt".
( excl. bouten )

€ 16,50
per stuk
007979 :  Zwart Riser Set
Complete zwart set met gladde cover zonder "skirt".
Voorzien van heavy duty urethane dampers die stugger zijn dan de standaard rubbers en daardoor zeer geschikt voor montage van apehangers en beachbars.
Incl. bevestigings materiaal :
4 x chroom imbus 5/16 UNC + afdekdopjes t.b.v. cover.
2 x 6kant bout 1/2 UNC + veerring voor montage risers.
Geschikt voor :
Big-Twin en XL Sportster 73up.
( excl. FLT modellen )

€ 82,50
per set
007981 :  Zwart Riser Set
Complete zwart set met finned cover zonder "skirt".
Voorzien van heavy duty urethane dampers die stugger zijn dan de standaard rubbers en daardoor zeer geschikt voor montage van apehangers en beachbars.
Incl. bevestigings materiaal :
4 x chroom imbus 5/16 UNC + afdekdopjes t.b.v. cover.
2 x 6kant bout 1/2 UNC + veerring voor montage risers.
Geschikt voor :
Big-Twin en XL Sportster 73up.
( excl. FLT modellen )

€ 83,50
per set
007982 :  Zwart Riser Set
Complete zwart set met gladde cover met "skirt".
Voorzien van heavy duty urethane dampers die stugger zijn dan de standaard rubbers en daardoor zeer geschikt voor montage van apehangers en beachbars.
Incl. bevestigings materiaal :
4 x chroom imbus 5/16 UNC + afdekdopjes t.b.v. cover.
2 x 6kant bout 1/2 UNC + veerring voor montage risers.
Geschikt voor :
Big-Twin en XL Sportster 73up.
( excl. FLT modellen )

€ 83,50
per set
007980 :  Zwart Riser Set
Complete zwart set met scalloped cover zonder "skirt".
Voorzien van heavy duty urethane dampers die stugger zijn dan de standaard rubbers en daardoor zeer geschikt voor montage van apehangers en beachbars.
Incl. bevestigings materiaal :
4 x chroom imbus 5/16 UNC + afdekdopjes t.b.v. cover.
2 x 6kant bout 1/2 UNC + veerring voor montage risers.
Geschikt voor :
Big-Twin en XL Sportster 73up.
( excl. FLT modellen )

€ 87,50
per set
006949 :  EASYRIDERS 'CYCLOPS' NARROW RISER
FOR 1 INCH BARS; DURALUMIN; POLISHED
After years and years of riser design by just about anybody, this is new!
Easyriders comes with the very best idea for the lowest, meanest & cleanest bolt-on set-up you can imagine.
You just can't help to wonder why nobody else thought of this basic idea before.
Mounts directly to the top triple tree riser mount holes, with 3 1/2" spacing, like most H-D models have.
Made from polished or black powdercoated duralumin, an aircraft quality aluminum alloy which gives a superior hardness and more than adequate strength.
Will take all 1" diameter handlebars.

€ 269,00
per set
006950 :  EASYRIDERS 'CYCLOPS' NARROW RISER
FOR 1 INCH BARS; DURALUMIN; BLACK POWDERCOATED
After years and years of riser design by just about anybody, this is new!
Easyriders comes with the very best idea for the lowest, meanest & cleanest bolt-on set-up you can imagine.
You just can't help to wonder why nobody else thought of this basic idea before.
Mounts directly to the top triple tree riser mount holes, with 3 1/2" spacing, like most H-D models have.

€ 269,00
per set
006937 :  PAUGHCO BRASS GLIDE STYLE RISERS 5 INCH
Post Style; Offset.
Fits universal 1 inch handlebars.

€ 467,50
per set
006936 :  PAUGHCO BRASS POST STYLE RISERS 3 INCH
Fits universal 1 inch handlebars.

€ 282,50
per set
006935 :  PAUGHCO BRASS GLIDE STYLE RISERS 4 INCH
Fits universal 1 inch handlebars.

€ 325,00
per set
006938 :  PAUGHCO BRASS GLIDE STYLE RISERS 5 INCH
Fits universal 1 inch handlebars.

€ 325,00
per set
009134 :  RISER 2BLT 1.5T F/1
RSD NOSTALGIA RISERS
•Two bolt and four bolt risers accept stock or aftermarket 25 mm (1”) diameter handlebars.
•Four bolt riser accepts stock or aftermarket 32 mm (11/4”) diameter handlebars.
•All styles designed to match the entire RSD Nostalgia line.
•Tough, simple and effective.
•38 mm (11/2”) tall.
•CNC machined from billet aluminum.
•Stainless steel hardware included.
•Drilled and tapped for 1/2”-13 mounting bolts.
•Available in Contrast Cut™, Chrome or Black Ops™.
•Made in the U.S.A.

FOR 25 MM (1”) HANDLEBARS WITH A 25 MM (1”) DIAMETER CLAMPING AREA.
2-bolt; Chrome

€ 184,28
Qty: PAIR
009135 :  RISER 2BLT 1.5T F/1
RSD NOSTALGIA RISERS
•Two bolt and four bolt risers accept stock or aftermarket 25 mm (1”) diameter handlebars.
•Four bolt riser accepts stock or aftermarket 32 mm (11/4”) diameter handlebars.
•All styles designed to match the entire RSD Nostalgia line.
•Tough, simple and effective.
•38 mm (11/2”) tall.
•CNC machined from billet aluminum.
•Stainless steel hardware included.
•Drilled and tapped for 1/2”-13 mounting bolts.
•Available in Contrast Cut™, Chrome or Black Ops™.
•Made in the U.S.A.

FOR 25 MM (1”) HANDLEBARS WITH A 25 MM (1”) DIAMETER CLAMPING AREA.
2-bolt; Black Ops

€ 184,28
Qty: PAIR
009133 :  RISER 2BLT 1.5T F/1
RSD NOSTALGIA RISERS
•Two bolt and four bolt risers accept stock or aftermarket 25 mm (1”) diameter handlebars.
•Four bolt riser accepts stock or aftermarket 32 mm (11/4”) diameter handlebars.
•All styles designed to match the entire RSD Nostalgia line.
•Tough, simple and effective.
•38 mm (11/2”) tall.
•CNC machined from billet aluminum.
•Stainless steel hardware included.
•Drilled and tapped for 1/2”-13 mounting bolts.
•Available in Contrast Cut™, Chrome or Black Ops™.
•Made in the U.S.A.

FOR 25 MM (1”) HANDLEBARS WITH A 25 MM (1”) DIAMETER CLAMPING AREA.
2-bolt; Contrast Cut

€ 184,28
Qty: PAIR
009137 :  RISER 4BLT 1.5T F/1
RSD NOSTALGIA RISERS
•Two bolt and four bolt risers accept stock or aftermarket 25 mm (1”) diameter handlebars.
•Four bolt riser accepts stock or aftermarket 32 mm (11/4”) diameter handlebars.
•All styles designed to match the entire RSD Nostalgia line.
•Tough, simple and effective.
•38 mm (11/2”) tall.
•CNC machined from billet aluminum.
•Stainless steel hardware included.
•Drilled and tapped for 1/2”-13 mounting bolts.
•Available in Contrast Cut™, Chrome or Black Ops™.
•Made in the U.S.A.

FOR 25 MM (1”) HANDLEBARS WITH A 25 MM (1”) DIAMETER CLAMPING AREA.
4-bolt; Chrome

€ 195,79
Qty: PAIR
009136 :  RISER 4BLT 1.5T F/1
RSD NOSTALGIA RISERS
•Two bolt and four bolt risers accept stock or aftermarket 25 mm (1”) diameter handlebars.
•Four bolt riser accepts stock or aftermarket 32 mm (11/4”) diameter handlebars.
•All styles designed to match the entire RSD Nostalgia line.
•Tough, simple and effective.
•38 mm (11/2”) tall.
•CNC machined from billet aluminum.
•Stainless steel hardware included.
•Drilled and tapped for 1/2”-13 mounting bolts.
•Available in Contrast Cut™, Chrome or Black Ops™.
•Made in the U.S.A.

FOR 25 MM (1”) HANDLEBARS WITH A 25 MM (1”) DIAMETER CLAMPING AREA.
4-bolt; Contast Cut

€ 195,79
Qty: PAIR
009138 :  RISER 4BLT 1.5T F/1
RSD NOSTALGIA RISERS
•Two bolt and four bolt risers accept stock or aftermarket 25 mm (1”) diameter handlebars.
•Four bolt riser accepts stock or aftermarket 32 mm (11/4”) diameter handlebars.
•All styles designed to match the entire RSD Nostalgia line.
•Tough, simple and effective.
•38 mm (11/2”) tall.
•CNC machined from billet aluminum.
•Stainless steel hardware included.
•Drilled and tapped for 1/2”-13 mounting bolts.
•Available in Contrast Cut™, Chrome or Black Ops™.
•Made in the U.S.A.

FOR 25 MM (1”) HANDLEBARS WITH A 25 MM (1”) DIAMETER CLAMPING AREA.
4-bolt; Black Ops

€ 195,79
Qty: PAIR
003770 :  Stuurdemper set FLT 4stuks
Los en wiebelend stuur.??
Vervang dan de rubbers in de bovenste balhoofdplaat.
84-11 FLT; Roadking.
Opmerking :
Product op de foto kan afwijken van origineel.

€ 14,50
per 4 stuks
001090 :  Stuurdemper set
Los en wiebelend stuur.??
Vervang dan de rubbers in de bovenste balhoofdplaat.
Compleet met bussen en chrome afdekringen.
Past op nagenoeg alle modellen 73-up Big-Twin;Sportster;Twin Cam.(ecxl.FLT)

€ 8,50
per kit
001091 :  Stuurdemper set extra hard
Zelfde toepassing als bovenstaande set echter stugger.
Aanbevolen bij o.a montage Apehangers en Beach Bars.
Polyurethane materiaal.
( excl. binnen bussen en ringen, deze dienen hergebruikt te worden van de OEM dempers. )

€ 7,50
per 4 stuks
008880 :  Stuurdemper set extra hard
Zelfde toepassing als bovenstaande sets echter stugger.
Aanbevolen bij o.a montage Apehangers en Beach Bars.
Hard nylon materiaal.
Incl. afdekringen.
Geen binnen bussen nodig want riser bouten 1/2 inch passen direct in gaten.
73-13 Big-Twin/XL Sportster.
( excl. FLT Touring )

€ 19,50
per kit
006646 :  Stuurdemper set Heavy Duty
Stiffer than the OEM rubber riser bushings, these urethane dampers provide excellent vibration dampening with superior deflection resistance.
Works great with tall handlebars.
Features chrome plated washers and anti-corrosion.
Zinc plated steel spacers.
Fits Big Twin 1973/Later & Sportster 1973/2003.
( except FLT models 1984/Later )

€ 17,50
per kit
006282 :  Stuurdemper set 84up style
Compleet set met bussen, draadstuds en chrome afdekringen.
Past op nagenoeg alle modellen 73-up Big-Twin;Sportster;Twin Cam.(ecxl.FLT)
Te gebruiken met risers voorzien van 1/2 UNC draad.

€ 24,50
per set
009570 :  CUSTOM RISER MOUNT KIT 1/2 UNC
Chrome plated steel with an integrated allen head bolt for a very custom and smooth look.
Designed to be used with handlebar damper rubbers of choice.
(excl. 84-13 FLT/Touring rubbers).
Note:
Damper rubbers must be purchased separately.
Enables you match risers with the required rubber firmness.
1/2-13 threaded.

€ 25,54
Qty: KIT
009571 :  CUSTOM RISER MOUNT KIT 1/2 UNF
Chrome plated steel with an integrated allen head bolt for a very custom and smooth look.
Designed to be used with handlebar damper rubbers of choice.
(excl. 84-13 FLT/Touring rubbers).
Note:
Damper rubbers must be purchased separately.
Enables you match risers with the required rubber firmness.
1/2-20 threaded.

€ 25,54
Qty: KIT
009576 :  GW RISER BOLT KIT
Chrome plated.
Made in U.S.A.
91-up Dyna; 97-up FXST.
1/2"-13. Allen

€ 15,25
Qty: KIT
009572 :  RISER BOLT KIT 1/2-13 X 2-3/4 INCH HEX
Chrome plated.
Made in U.S.A.
1/2-13 x 2-3/4". Hex

€ 14,77
Qty: KIT
009573 :  RISER BOLT KIT 1/2-20 X 2-3/4 INCH HEX
Chrome plated.
Made in U.S.A.
1/2-20 x 2-3/4". Hex

€ 14,91
Qty: KIT
009575 :  RISER BOLT KIT 1/2-13 X 2-1/2 INCH ALLEN
Chrome plated.
Made in U.S.A.
86-up FXST/C (excl. FXSTS); 95-up- FLST; 80-84 FXWG and 93-up FLT.
1/2-13 x 2-1/2".Allen

€ 14,91
Qty: KIT
009574 :  RISER BOLT KIT. 1/2-13 X 3-3/4. HEX
Chrome plated.
Made in U.S.A.
74-84 FX.
1/2-13 x 3-3/4".Hex

€ 15,25
Qty: KIT
006272 :  Kroonplaat Springer Stuur Off-Line
Maak met behulp van dit inlas stuk jouw eigen ontwerp stuur voor de Springer vork.
Geschikt voor 1 inch ( 25,4 mm ) buis.

€ 119,50
006271 :  Kroonplaat Springer Stuur In-Line
Maak met behulp van dit inlas stuk jouw eigen ontwerp stuur voor de Springer vork.
Geschikt voor 1 inch ( 25,4 mm ) buis.

€ 119,50
006939 :  Black handlebar control conversion kit
If you have an issue with chrome, like getting allergic reactions to the eye blistering stuff, or worse, this is yours.
This kit is complete, but stock switches must be re-used.
Apart from the gone-is-chrome color this kit will upgrade your cable operated clutch to a hydraulic clutch system, with no additional parts required.
Easy to install and nothing more to wish.
Fits 96-06 Softail, Touring 5-speeds
96-05 Dyna 5-speed models.

€ 359,00
per set
008285 :  “RETRO” Handlebar Control Kit Chrome
•Revolutionary handlebar controls designed with clean retro styling for almost any custom application.
•Machined from 6061 T‑6 billet aluminum.
•Chrome finish 9/16” bore.
•Throttle housings and grip not included.
Made in the U.S.A.

€ 825,00
per set
008286 :  “RETRO” Handlebar Control Kit Black
•Revolutionary handlebar controls designed with clean retro styling for almost any custom application.
•Machined from 6061 T‑6 billet aluminum.
•Black anodized finish 9/16” bore.
•Throttle housings and grip not included.
Made in the U.S.A.

€ 825,00
per set
001701 :  Stuur control kit 96up 11/16
Geheel chroom set van goede kwaliteit.
Toe te passen op :
96-07 Big-Twin modellen dubbel schijf.
96-03 XL modellen dubbel schijf.
De bestaande schakelaars worden hergebruikt.
Dit set is ook origineel HD te verkrijgen en kost dan ruim 1000 euro.!

€ 202,50
per set
000569 :  RST controlset
Billet alu.

€ 569,00
per set
000570 :  RST clutchcontrol
Billet alu.

€ 202,50
000571 :  RST master cil,5/8
Billet alu.

€ 359,00
001037 :  CPV controlset
Alu.zwart geanodiseerd set.
5/8 bore voor gebruik met enkele/dubbele klauw en enkel 4 en 6 zuiger klauwen.
Incl.4 drukschakelaars waarvan de bedrading rechtstreeks het stuur in kan.

€ 595,00
009943 :  Rem cilinder body 72-81 Chrome
Replacement body only without internal components for front brake.
72-81 FL; 73-81 FX, XL Sportster.

€ 49,00
per stuk
009844 :  Stuurcontrolkit 72-81 Zwart OEM Style
Black OEM Style Kit with chrome levers.
without switches (as shown).
Fits all models 1972-1981 with OE single or dual disc brake.
Also fits aftermarket caliper that requires a 3/4" bore master cylinder.

€ 157,50
per kit
006917 :  Stuurcontrolkit chroom 72-81 Wide Lever
Chrome Plated Kit with ergonomic levers 93up Style without switches (as shown).
Fits all models 1972-1981 with OE single or dual disc brake.
Also fits aftermarket caliper that requires a 5/8" bore master cylinder.
Great for custom use..!

€ 159,00
per set
009942 :  Stuurcontrolkit 72-81 Chroom OEM Style
Chrome OEM Style Kit with chrome levers and switches.
•Die-cast OEM-style metal housing with a chrome finish.
•Switches come pre-assembled with 122 cm (48”) wire leads.
•Kits include clutch lever assembly, master cylinder assembly, housings with switches and hardware.
Fits all models 1972-1981 with OE single or dual disc brake.
Also fits aftermarket caliper that requires a 3/4" bore master cylinder.

€ 165,00
per kit
007067 :  Contour Style Handlebar Control Kit Chrome (2)

€ 0,00
005967 :  Stuurcontrolkit chroom 82-83 Dual Disc
Chrome Plated Kit with ergonomic levers without switches (as shown).
Fits all models 1982-1983 with OE dual disc brake.
Also fits aftermarket calipers that requires a 3/4" bore master cylinder.

€ 209,00
per set
005966 :  Stuurcontrolkit chroom 84-95 Dual Disq
Chrome Plated Kit with ergonomic levers without switches (as shown).
Fits all models 1984-1995 with OE dual disc brake.
Also fits aftermarket calipers that requires a 11/16" bore master cylinder.

€ 197,50
per set
005033 :  Stuurcontrolkit chroom 82-95 Single Disq
Chrome Plated Kit with ergonomic levers without switches (as shown).
Fits all models 1982-1995 with OE single disc brake.
Also fits aftermarket caliper that requires a 5/8" bore master cylinder.

€ 209,00
per set
006055 :  Stuurcontrolkit chroom 96-13 Single Disq
Chrome Plated Kit with ergonomic levers without switches.
Kit includes a 9/16" bore master cylinder, clutch handle with clamp, and 2 pairs of switch housings without switches for single disc.
Fits :
1996-2013 Big-Twin
1996-2003 XL Sportster
( excl. 11-13 Softail; 12-13 Dyna; FXCW; Touring)
(except models with radio controls or cruise control)
Also fits aftermarket caliper that requires a 9/16" bore master cylinder.

€ 209,50
per set
000559 :  Intern gas rechts
Past in alle 1 inch sturen.
Stalen uitvoering.
Teflon gelagerd.
Wordt geborgd in het stuur d.m.v schroefje maar kan ook gelast worden voor een "clean" look.

€ 79,00
per stuk
006445 :  ZZ Top Handlebar Chrome 1-1/4 inch
1 1/4" O.D. steel handlebars provide a massive look with a style right out of the 1950's.
To keep the switch wires out of sight the bars have been dimpled like the 1982/Later OE bars) and slotted under the switch housing area so the wires can be run internally.
The brake side has been clearanced to be used with OE style master cylinders (all years including 1996/Later) and most custom brake master cylinders.
Knurled at the riser area to help prevent slippage.
Fits risers mounted on 3 1/2" centers.
Width : 30" ( 762 mm )
Rise: 8½" ( 216 mm )
Pullback: 6" ( 152 mm )
Center Width: 8½" ( 216 mm )

€ 179,00
003586 :  Reduceer set 1 inch naar 7/8 ( 22mm )
Wil je een bv. een Japans stuur ( 22mm ) monteren op 1 inch risers..? Dit setje biedt dan de oplossing.

€ 7,50
per set 4
000850 :  Vibratie dempers
Massief messing.
Vermindert minimaal 50% van de trillingen in het stuur.
Gewicht ca. 285 gram per stuk.

€ 29,00
per set
004666 :  Remhendel 1928-1940
Chroom reproductie set.
J 1928-1929
VL 1930-1936
EL 1936-1940
UL 1937-1940

€ 75,00
per stuk
005307 :  Old-Style rem/koppeling hendel
Toe te passen voor rem of koppeling.
Standaard vervanging voor :
41-64 FL/FLH rem.
52-64 FL/FLH koppeling.
54-64 KH/XL rem.
Chroom uitvoering.

€ 18,50
per stuk
002706 :  Remhendel universeel alu.
Alu.polished 5/16 gat.
Universeel 1 inch sturen.
Voor alle modellen met een trommelrem die bediend wordt met een kabel.

€ 10,50
per stuk
004839 :  Remhendel universeel chroom
Chroom 5/16 gat.
Universeel 1 inch sturen.
Voor alle modellen met een trommelrem die bediend wordt met een kabel.

€ 14,50
per stuk
001439 :  Koppelings hendel univ. alu.
Universeel 1 inch sturen.
Alu.polished 3/8 gat.

€ 11,50
per stuk
000578 :  Koppelings hendel + steun 72-81 chr.
Chroom t/m 1981

€ 14,50
per kit
004838 :  Koppelings hendel + steun 72-81 alu.
Alu.polished t/m 1981

€ 18,50
per stuk
002502 :  Koppelingshendel staal/chrome
Super robuust chroom staal hendel made by Barnett.
Zeer grote slag dus veel hevelwerking.
Perfect voor iedere custom fiets.!
Niet goedkoop maar dubbel en dwars het geld waard.!

€ 52,50
000890 :  Koppelings hendel univ. chroom
Universeel 1 inch sturen.
Chroom 3/8" gat.

€ 14,00
per stuk
001381 :  Koppelings hendel 65-81 alu.polished
Alu.polished.
65-81 FL,FX,XL

€ 5,50
per stuk
001383 :  Koppelings hendel 65-81 chroom
Chroom.
65-81 FL,FX,XL

€ 8,00
per stuk
005305 :  Koppelings hendel 65-81 chroom Magura style
Chroom koppelings hendel "Magura style" voor een comfortabele en kortere grip.
Dit hendel is vooral aan te raden voor mensen met wat kortere vingers.
65-81 FL,FX,XL

€ 8,00
per stuk
005306 :  Rem hendel 72-81 chroom Magura style
Chroom rem hendel "Magura style" voor een comfortabele en kortere grip.
Dit hendel is vooral aan te raden voor mensen met wat kortere vingers.
72-81 FL,FX,XL

€ 8,50
per stuk
004837 :  Rem hendel 72-81 chroom
Chroom.
73-81 FL,FX,XL

€ 5,50
per stuk
001382 :  Rem hendel 72-81 alu.polished
Alu.polished.
73-81 FL,FX,XL

€ 5,50
per stuk
004841 :  Koppelings hendel 82-00 chroom
Big-Twin & Sportster 82-00.
Opmerking :
Foto is van alu.uitvoering.

€ 10,00
per stuk
004840 :  Koppelings hendel 82-00 alu.polished
Big-Twin & Sportster 82-00.

€ 9,00
per stuk
004843 :  Rem hendel 82-95 chroom
Big-Twin & Sportster 82-95.
Opmerking :
Foto is van alu. uitvoering.

€ 8,50
per stuk
004842 :  Rem hendel 82-95 alu.polished
Big-Twin & Sportster 82-95.

€ 8,00
per stuk
005304 :  Rem hendel 82-95 alu.polished wide lever style
Alu.polished rem hendel "93up wide lever style" voor een comfortabele en kortere grip.
Dit hendel is vooral aan te raden voor mensen met wat kortere vingers.
Big-Twin & XL Sportster 82-95

€ 11,50
per stuk
005527 :  Hendel set 82-95 standaard style
Chroom hendel set.
Big-Twin & XL Sportster 82-95

€ 17,00
per set
003927 :  Hendel set 82-95 wide lever style
Alu.polished hendel set "93up wide lever style" voor een comfortabele en kortere grip.
Deze hendels zijn vooral aan te raden voor mensen met wat kortere vingers.
Big-Twin & XL Sportster 82-95

€ 18,50
per set
003966 :  Hendel set 82-95 wide lever style
Chroom hendel set "93up wide lever style" voor een comfortabele en kortere grip.
Deze hendels zijn vooral aan te raden voor mensen met wat kortere vingers.
Big-Twin & XL Sportster 82-95

€ 26,50
per set
006766 :  Hendel set 82-95 wide lever style Zwart
Zwart hendel set "93up wide lever style" voor een comfortabele en kortere grip.
Deze hendels zijn vooral aan te raden voor mensen met wat kortere vingers.
Big-Twin & XL Sportster 82-95

€ 26,50
per set
008254 :  Koppelings hendel & clampset 96-up Chroom
Big-Twin 96-up.
Sportster 1996-2003.

€ 31,50
per stuk
004844 :  Koppelings hendel 96up alu.polished
Big-Twin 82-11.
( Excl. FLT 08-11 )
Sportster 96-03

€ 16,00
per stuk
004845 :  Koppelings hendel 96up chroom
Big-Twin 82-13.
( Excl. FLT 08-13 )
Sportster 96-03
Opmerking :
Foto is van alu. uitvoering.

€ 16,00
per stuk
004846 :  Remhendel 96up alu.polished
Big-Twin 96-09.
Sportster 96-03

€ 14,00
per stuk
004847 :  Remhendel 96-up chroom
Big-Twin 96-14.
( excl. 08-14 FLT )
Sportster 96-03
Opmerking :
Foto is van alu. uitvoering.

€ 17,50
per stuk
005651 :  Skull hendelset 96-13
Chroom hendelset voor :
96-13 Big-Twin
( excl. 08-13 Touring )
XL Sportster 1996-2003

€ 36,50
per set
006764 :  Hendel set 96up Zwart
96-07 Big-Twin
96-03 XL Sportster.

€ 25,00
per set
004821 :  Hendelset 96up chroom
96-11 Big-Twin (Excl. 08-11 FLT)
96-03(NU)XL Sportster.
( met kabel bediende koppeling )
Opmerking :
Foto is van alu.uitvoering.

€ 27,50
per set
004820 :  Hendelset 96up alu.polished
96-11 Big-Twin (Excl. 08-11 FLT)
96-03(NU)XL Sportster.
( met kabel bediende koppeling )

€ 27,50
per set
006748 :  Hendel set Sportster 04-13 Zwart
Zwart hendel set.
Standaard "wide lever"
Sportster modellen 2004-2013
XR1200 2008-2012

€ 25,00
per set
005528 :  Hendel set Sportster 04-07 Chroom
Chroom hendel set.
Standaard "wide lever"
Sportster modellen 2004-2007

€ 29,50
per set
006765 :  Hendel set Softail/Dyna 08-13 Zwart
08-13 Softail & Dyna modellen.

€ 27,50
per set
008102 :  Hendel set Touring 08-13 Zwart
Zwart hendel set.
Custom "wide lever".
Touring modellen 2008-2013

€ 29,50
per set
008746 :  Leather lever covers fringed
•Black leather lever covers feature 30.5 cm (12”) long fringe.
•Fit any of the larger, cruiser-style replacement levers.
Made in the U.S.A.

€ 15,50
per paar
008745 :  Leather lever covers
•Handcrafted, black leather clutch and brake lever covers come with laces.
•Fit the larger size, stock or custom cruiser-style levers.
•Set includes cover, laces, beads and instructions.
•Fit standard levers only, not wide-blade levers.
•Made in the U.S.A.

€ 16,50
per paar
001386 :  Koppelings/rem kabel pin set L68-81
Stalen pin met kunststof busjes voor de koppelingshendel.
L68-81 Big-Twin; XL Sportster.
Remhendel 65-72 Big-Twin; XL Sportster.

€ 1,70
per set
001387 :  Kunstof busjes set
Van bovenstaande set alleen de busjes.

€ 0,60
per paar
006847 :  Koppelings kabel pin set 82-87
Stalen pin met kunststof busjes voor de koppelingshendel.
82-87 Big-Twin; XL Sportster.

€ 5,75
per set
004848 :  Bushing kunststof remhendel 96up
Big-Twin 96-11.
( Excl. FLT 08-11 )
Sportster 96-03<

€ 3,80
per stuk
004025 :  Pin Early Style Hendel
Stalen pin set voor de koppeling en remhendel.
Big-Twin,XL,KH 49-67

€ 5,50
per kit
001388 :  Koppelings kabel pin
Nylon pin voor koppelingshendel.
Big-Twin 88up;88-03 XL.

€ 1,50
per kit
001396 :  Bevestigings pin hendel
65-81 koppelingshendel.
65-75 mechanische remhendel.

€ 2,25
per kit
001390 :  Bevestiging pinset remhendel en plunjer
Big-Twin & XL Sportster 72-81.

€ 9,50
per kit
001389 :  Bevestigings pin hendel
Koppelings en remhendel pinset
82-07 Big-Twin;82-03 XL.

€ 2,95
per kit
004211 :  Retro remcilinder stuur alu/brass polished
Old-Skool alu/brass polished.
Geschikt voor enkele en dubbele schijf.

€ 319,00
per stuk
004210 :  Retro koppelingshendel alu/brass polished
Alu/brass polished hendel.
Matching met bovenstaande remcilinder.

€ 167,50
per stuk
005279 :  Retro remhendel alu/brass polished
Alu/brass polished hendel.

€ 167,50
per stuk
006216 :  Retro remcilinder stuur alu.raw finish
Old-Skool alu.raw finish.
14mm bore,geschikt voor enkele/dubbele schijf.

€ 285,00
per stuk
006215 :  Retro remcilinder stuur alu.satin
Old-Skool alu.satin.
14mm bore,geschikt voor enkele/dubbele schijf.

€ 298,50
per stuk
002083 :  Retro remcilinder stuur alu.polished
Old-Skool alu.polished.
14mm bore,geschikt voor enkele/dubbele schijf.

€ 319,00
per stuk
007120 :  Retro koppelingshendel alu.raw
Raw alu. hendel.
Perfect matching met bovenstaande alu.raw retro remcilinder.
Schitterende kwaliteit, geen spelingen etc.!
Niet goedkoop maar dubbel en dwars het geld waard.

€ 147,50
per stuk
007121 :  Retro koppelingshendel alu.satin
Satin alu. hendel.
Perfect matching met bovenstaande satin alu. retro remcilinder.
Schitterende kwaliteit, geen spelingen etc.!
Niet goedkoop maar dubbel en dwars het geld waard.

€ 159,00
per stuk
007119 :  Retro koppelingshendel alu.polished
Alu.polished hendel.
Perfect matching met bovenstaande alu.polished retro remcilinder.
Schitterende kwaliteit, geen spelingen etc.!
Niet goedkoop maar dubbel en dwars het geld waard.

€ 165,00
per stuk
002084 :  Retro koppelingshendel alu.polished
Alu.polished hendel.
Goedkoper alternatief voor gebruik met bovenstaande alu.polished retro remcilinder.

€ 72,50
per stuk
000580 :  Hoofdrem cilinder stuur 72-81
Chroom OEM vervangings remcilinder.
Compleet met alle interne onderdelen.
Incl. voorgemonteerde remlichtschakelaar.
FL, FLH Shovelhead 72-81.
FX Shovelhead 73-81.
XL Ironhead Sportster 73-81.

€ 87,50
per stuk
000577 :  Hoofdrem cilinder stuur 72-81
Alu. polished OEM vervangings remcilinder.
Compleet met alle interne onderdelen.
Incl. voorgemonteerde remlichtschakelaar.
FL, FLH Shovelhead 72-81.
FX Shovelhead 73-81.
XL Ironhead Sportster 73-81.

€ 89,00
per stuk
000849 :  Pakking remcilinder stuur
Mastercilinder stuur.
72-81 alle modellen.

€ 1,80
per stuk
002089 :  Remcilinder stuur 5/8
5/8" bore 82-95 single disc modellen.

€ 177,50
002087 :  Remcilinder stuur 3/4
3/4" bore 82-84 dual disc modellen.

€ 187,50
002088 :  Remcilinder stuur 11/16 Zwart
11/16" bore 85-95 dual disc modellen.

€ 187,50
per stuk
000854 :  Switch housing glad chroom
Te gebruiken wannneer er geen schakelaars zijn gemonteerd op het stuur.
incl.boutjes.

€ 9,00
per kit
001348 :  Switch housing glad alu.polished
Te gebruiken wannneer er geen schakelaars zijn gemonteerd op het stuur.
incl.boutjes.

€ 9,50
004457 :  Custom switch housing chroom
Design gevormde chroom schakelaar behuizing voor alle modellen t/m 1981.
Incl. boutjes maar geen stickers want die worden hier niet geplaatst.

€ 10,50
per stuk
004456 :  Sticker switch housing
Sticker met aanduidingen voor linker en rechterkant van de schakelaarbehuizingen op alle modellen t/m 1981.

€ 1,50
000853 :  Switch housing chroom verticaal
Standaard vervanging voor :
XL Sportster 73-81
FL/FX 72-81
incl.boutjes en stickers.

€ 10,00
per kit
002372 :  Switch housing alu.gepolijst 72-81
Incl.boutjes en stickers.
FL, FLH Shovelhead 72-81.
FX Shovelhead 73-81.
XL Ironhead Sportster 73-81.

€ 12,50
per kit
002373 :  Switch housing zwart
incl.boutjes en stickers.

€ 13,50
002374 :  Switch housing glad zwart
Te gebruiken wannneer er geen schakelaars zijn gemonteerd op het stuur.
incl.boutjes.

€ 13,50
006689 :  Chroom Imbus Bout 10/24 x 1¼ inch
Vervangings imbus voor de switch housings 72-81.

€ 1,65
per stuk
005765 :  Koppelings hendel steun 73-81
Zwart.
73-81 alle modellen.

€ 8,50
001398 :  Koppelings hendel steun 73-81
Chroom.
73-81 alle modellen.

€ 9,50
006995 :  Koppelings hendel steun 82-95 Zwart
Zwarte uitvoering, steun + clamp.
(excl. hendel )
Big-Twin & XL Sportsters 82-95.

€ 26,50
per kit
001397 :  Koppelings hendel steun 73-81
Alu.polished.
73-81 alle modellen.

€ 8,50
per stuk
005522 :  Koppelings hendel steun 82-95 Chroom
Chroom uitvoering (excl. hendel )
Big-Twin & XL Sportsters 82-95.

€ 24,50
per kit
008394 :  Koppelings hendel steun 96-13 Zwart
Zwarte uitvoering steun.
(excl. clamp +hendel )
96-13 Alle modellen.
(excl. 08-13 Dressers, H-D FL Trike en 04-13 XL Sportster).

€ 13,50
per stuk
008395 :  Koppelings hendel steun 96-13 Chroom
Chroom uitvoering steun.
(excl. clamp +hendel )
96-13 Alle modellen.
(excl. 08-13 Dressers, H-D FL Trike en 04-13 XL Sportster).

€ 19,50
per stuk
000582 :  Clamp zwart rem/kopp.hendel 82-95
Alle stuurcontrols 82-95.
( excl. FLHTCU with radio switch.)

€ 10,50
per stuk
004857 :  Clamp chroom rem/kopp.hendel 82-95
Alle stuurcontrols 82-95.
( excl. FLHTCU with radio switch.)

€ 11,50
per stuk
008460 :  Clamp zwart rem/kopp.hendel 96-13
Alle stuurcontrols 96-13.
(Excl. 08-13 Dressers, H-D FL Trike and 04-13 XL Sportster)

€ 8,50
per stuk
001557 :  Jaybrake koppelingshendel
Clamp on style.
Zwart geanodiseerd.

€ 239,00
001556 :  Jaybrake remcilinder
Clamp on,5/8" bore.
Zwart geanodiseerd.

€ 369,00
009990 :  LOWBROW GT GRIPS, TEAL
FOR 1" HANDLEBARS

€ 20,03
Qty: PAIR
009989 :  LOWBROW GT GRIPS, OXBLOOD RED
FOR 1" HANDLEBARS

€ 20,03
Qty: PAIR
009987 :  LOWBROW GT GRIPS, BLACK
FOR 1" HANDLEBARS

€ 20,03
Qty: PAIR
009988 :  LOWBROW GT GRIPS, DOVE GREY
FOR 1" HANDLEBARS

€ 20,03
Qty: PAIR
009991 :  COLE FOSTER GRIPS, BLACK
FOR 1" HANDLEBARS

€ 28,25
Qty: PAIR
009992 :  COLE FOSTER GRIPS, ANTIQUE GREY MARBLE
FOR 1" HANDLEBARS

€ 28,25
Qty: PAIR
009993 :  COLE FOSTER GRIPS, MOCHA MARBLE
FOR 1" HANDLEBARS

€ 28,25
Qty: PAIR
006648 :  Tech-Tip Handvaten MCS

€ 0,00
007613 :  Handvat set OEM Style 08-up
Replacement OEM style grips for models with Fly-By-Wire throttle control.
Past op 1 inch ( 25,4mm ) sturen.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft binnendiameter geschikt voor de kunststof gashuls ( rechts ).
Fits Big Twin models 2008/Later with Fly-By-Wire throttle.

€ 14,50
per paar
007550 :  Handvat set OEM Style Small Diameter
Gereduceerde diameter handvaten.
Ideaal voor mensen met korte vingers.
Past standaard op alle 96up modellen.
Ook toe te passen op oudere modellen als het laatste stukje van het linker handvat wordt verwijderd.

€ 21,50
per set
004001 :  Handvat OEM links 96-UP
Origineel HD vervanging voor :
96-10 Softail & Dyna
96-07 FLT
96-03 XL Sportster

€ 15,50
per stuk
007511 :  Gas Handvat OEM rechts 96-UP
Origineel HD vervanging voor :
96-10 Softail & Dyna
96-07 FLT
96-03 XL Sportster

€ 19,50
per stuk
005677 :  Old School Cross Grips Red/White
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft binnendiameter geschikt voor de kunststof of metalen gashuls ( rechts ).

€ 42,50
per set
005678 :  Old School Cross Grips Blue/White
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft binnendiameter geschikt voor de kunststof of metalen gashuls ( rechts ).

€ 42,50
per set
005735 :  Old School Cross Grips Grey/White
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft binnendiameter geschikt voor de kunststof of metalen gashuls ( rechts ).

€ 42,50
per set
000091 :  Handvaten rood vintage style
Rood rubber.
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft binnendiameter geschikt voor de kunststof of metalen gashuls ( rechts ).

€ 6,00
per set
002598 :  Handvaten wit vintage style
Wit rubber.
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft binnendiameter geschikt voor de kunststof of metalen gashuls ( rechts ).

€ 6,50
per set
002720 :  Handvaten zwart vintage style
Zwart rubber.
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft binnendiameter geschikt voor de kunststof of metalen gashuls ( rechts ).

€ 6,50
per paar
005768 :  Handvaten chocolade bruin vintage style
Bruin rubber.
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft binnendiameter geschikt voor de kunststof of metalen gashuls ( rechts ).

€ 6,50
per set
005769 :  Handvaten caramel bruin vintage style
Caramel bruin rubber.
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft binnendiameter geschikt voor de kunststof of metalen gashuls ( rechts ).

€ 7,50
per set
000647 :  Handvaten Chopper-Style Zwart
Strak en stevige grip.
Zwart rubber.
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft binnendiameter geschikt voor de kunststof of metalen gashuls ( rechts ).

€ 7,50
per set
002339 :  Handvaten Metal Flake Red
Let's Disco and get back to the Seventies met deze leuke set..!!
Transparant rubber met metaal glitter.
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft binnendiameter geschikt voor de kunststof of metalen gashuls ( rechts ).

€ 8,50
per set
002338 :  Handvaten Metal Flake Black Charcoal
Let's Disco and get back to the Seventies met deze leuke set..!!
Transparant rubber met metaal glitter.
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft binnendiameter geschikt voor de kunststof of metalen gashuls ( rechts ).

€ 9,00
per set
002341 :  Handvaten Metal Flake Blue
Let's Disco and get back to the Seventies met deze leuke set..!!
Transparant rubber met metaal glitter.
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft binnendiameter geschikt voor de kunststof of metalen gashuls ( rechts ).

€ 12,50
per set
002342 :  Handvaten Metal Flake Aqua
Let's Disco and get back to the Seventies met deze leuke set..!!
Transparant rubber met metaal glitter.
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft binnendiameter geschikt voor de kunststof of metalen gashuls ( rechts ).

€ 12,50
per set
002343 :  Handvaten Metal Flake Yellow
Let's Disco and get back to the Seventies met deze leuke set..!!
Transparant rubber met metaal glitter.
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft binnendiameter geschikt voor de kunststof of metalen gashuls ( rechts ).

€ 12,50
per set
002340 :  Handvaten Metal Flake Clear/Silver
Let's Disco and get back to the Seventies met deze leuke set..!!
Transparant rubber met metaal glitter.
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft binnendiameter geschikt voor de kunststof of metalen gashuls ( rechts ).

€ 12,50
per set
001193 :  Handvaten Old School Rood
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft geintrigeerde gashuls ( rechts ).

€ 22,50
per set
005609 :  Handvaten Rood Glitter Spark
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft geintrigeerde gashuls ( rechts ).

€ 22,50
per set
001194 :  Handvaten Old School Zwart
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft geintrigeerde gashuls ( rechts ).

€ 22,50
per set
004931 :  Handvaten Old School Wit
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft geintrigeerde gashuls ( rechts ).

€ 22,50
per set
005610 :  Handvaten Blauw Glitter Spark
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft geintrigeerde gashuls ( rechts ).

€ 22,50
per set
001488 :  Handvaten Rail Rubber/Chroom
Rubber rail met chroom staal cover.
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft binnendiameter geschikt voor de kunststof of metalen gashuls ( rechts ).

€ 23,50
per set
004682 :  Handvaten Rail Rubber/Chroom
Rubber rail met chroom staal cover.
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft binnendiameter geschikt voor de kunststof of metalen gashuls ( rechts ).

€ 24,50
per set
001347 :  Handvaten Vintage Style 96-09
Vintage Style voor XL en Big-Twin 96up
Stevig rubber voor een goede grip en afgewerkt met showchroom eindhuls.
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft binnendiameter geschikt voor de kunststof of metalen gashuls ( rechts ).

€ 26,50
per paar
002729 :  Handvaten Vintage Style 74-95
Vintage Style voor XL en Big-Twin 74-95
Stevig rubber voor een goede grip en afgewerkt met showchroom eindhuls.
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft geintrigeerde gashuls ( rechts ).

€ 26,50
per set
007551 :  Handvaten Vintage Style 08-09 FLT
Vintage Style voor Touring modellen E-Throttle
Past op 1 inch ( 25,4mm ) sturen.
Stevig rubber voor een goede grip en afgewerkt met showchroom eindhuls.

€ 28,50
per set
002776 :  Handvaten Panhead zwart
Perfecte replica set van deluxe uitvoering voor de Panheads.
Hard zwart kunststof.De binnendiameter is voor beide handvaten 11/8 inch ( 28,5mm )dus geschikt voor de interne bediening van gas en ontsteking.

€ 28,50
per set
002748 :  Handvaten Panhead wit
Perfecte replica set van deluxe uitvoering voor de Panheads.
Hard wit kunststof.De binnendiameter is voor beide handvaten 11/8 inch ( 28,5mm )dus geschikt voor de interne bediening van gas en ontsteking.

€ 28,50
per set
005370 :  Handvaten Early Style Barrel Bruin
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft binnendiameter geschikt voor de kunststof of metalen gashuls ( rechts ).

€ 43,50
per set
000649 :  Handvaten Contour Style Chroom
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft geintrigeerde gashuls ( rechts ).

€ 52,50
per set
000560 :  Handvaten Billet Alu Cross Fade
Billet Alu.Polished.
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft geintrigeerde gashuls ( rechts ).

€ 62,50
per set
000648 :  Handvaten Billet Alu Grooved
Aluminium Satin Grooved.
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft geintrigeerde gashuls ( rechts ).

€ 62,50
per set
001775 :  Kuryakyn Iso-Grips
Zeer comfortabel vanwege luchtkussens in greep dus minder trillingen in de handen.
Uit te breiden met onderstaande Throttle-Boss.
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft binnendiameter geschikt voor de kunststof of metalen gashuls ( rechts ).

€ 89,00
per set
006339 :  Handvaten Kung-Fu Naturel
BMX inspired top quality rubber grips.
Decorative thick ends are very durable.
Small rubber fins offer comfort on long rides.
Great old school look for a great price..!
Fits : 1 inch ( 25,4mm ) handlebars.
All models with external throttle cable(s).
1 grip has inner diameter handlebar ( left ).
1 grip has inner diameter for plastic or metal throttle sleeve ( right ).

€ 17,50
per paar
006793 :  Handvaten Kung-Fu Black
BMX inspired top quality rubber grips.
Decorative thick ends are very durable.
Small rubber fins offer comfort on long rides.
Great old school look for a great price..!
Fits : 1 inch ( 25,4mm ) handlebars.
All models with external throttle cable(s).
1 grip has inner diameter handlebar ( left ).
1 grip has inner diameter for plastic or metal throttle sleeve ( right ).

€ 18,00
per paar
008773 :  Handvaten Thruster Chocolate
BMX inspired top quality rubber grips.
Decorative thick ends are very durable.
Small rubber fins offer comfort on long rides.
Great old school look for a great price..!
Fits : 1 inch ( 25,4mm ) handlebars.
All models with external throttle cable(s).
1 grip has inner diameter handlebar ( left ).
1 grip has inner diameter for plastic or metal throttle sleeve ( right ).

€ 18,50
per paar
008772 :  Handvaten Thruster Blue
BMX inspired top quality rubber grips.
Decorative thick ends are very durable.
Small rubber fins offer comfort on long rides.
Great old school look for a great price..!
Fits : 1 inch ( 25,4mm ) handlebars.
All models with external throttle cable(s).
1 grip has inner diameter handlebar ( left ).
1 grip has inner diameter for plastic or metal throttle sleeve ( right ).

€ 18,50
per paar
008774 :  Handvaten Thruster Light Grey
BMX inspired top quality rubber grips.
Decorative thick ends are very durable.
Small rubber fins offer comfort on long rides.
Great old school look for a great price..!
Fits : 1 inch ( 25,4mm ) handlebars.
All models with external throttle cable(s).
1 grip has inner diameter handlebar ( left ).
1 grip has inner diameter for plastic or metal throttle sleeve ( right ).

€ 18,50
per paar
008771 :  Handvaten Thruster Black
BMX inspired top quality rubber grips.
Decorative thick ends are very durable.
Small rubber fins offer comfort on long rides.
Great old school look for a great price..!
Fits : 1 inch ( 25,4mm ) handlebars.
All models with external throttle cable(s).
1 grip has inner diameter handlebar ( left ).
1 grip has inner diameter for plastic or metal throttle sleeve ( right ).

€ 18,50
per paar
002777 :  Handvaten Vintage Zwart
Waffle design met gat voor chrome eindplug.
( plugset apart bij te bestellen )
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft binnendiameter geschikt voor de kunststof of metalen gashuls ( rechts ).

€ 14,50
per set
002778 :  Handvaten Vintage Wit
Waffle design met gat voor chrome eindplug.
( plugset apart bij te bestellen )
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft binnendiameter geschikt voor de kunststof of metalen gashuls ( rechts ).

€ 19,00
per set
002779 :  Plugset voor Vintage Handvaten
Chroom set voor bovenstaande handvaten.

€ 4,90
per set
006771 :  Chrome end plugset early grips
Use these chrome plugs in your stock handlebar grips to seal off the end of the handlebar to help prevent moisture from entering the handlebars.
Fits:
FL 1960-1980
FX 1974-1980
XL 1974-1980
OEM 56238-62

€ 5,60
per set
006691 :  Cushion Foam Grips
Black foam with plain chrome end cap.
Helps to prevent vibrations.
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft binnendiameter geschikt voor de kunststof of metalen gashuls ( rechts ).

€ 14,50
per set
006836 :  Cushion Foam Leather Look Grips
Cushion foam wrapped with textured leather look material.
Plain chrome end caps.
Helps to prevent vibrations.
Past op 1 inch ( 25,4mm ) sturen.
Geschikt voor alle modellen met gaskabel(s) buiten langs.
1 handvat heeft binnendiameter stuur ( links ).
1 handvat heeft binnendiameter geschikt voor de kunststof of metalen gashuls ( rechts ).

€ 19,50
per set
000983 :  Vervangings Foam handvaten
Vervangingset voor de foam handvaten.

€ 4,50
per set
004458 :  Gashendel set Old-Style Grips
Single cable.
Past standaard op :
Big-Twin & Sportsters 74-80
Aansluiting :
1/4 UNC elleboog pull kabel. Stevige rubberen Old-Style grips.
Metalen gashuls.

€ 16,50
per set
006953 :  Biltwell Whiskey alu trottle Sleeve
•CNC-machined 6061 T-6 aluminum throttle tube.
•Allows owners to replace the thick, generally uncomfortable stock molded one-piece grips with soft aftermarket grips.
•The CNC-machined cable channel has barrel openings for two cables.

€ 52,50
per stuk
006952 :  Biltwell Whiskey alu trottle Stainless Steel
Dual cable for 1 inch handlebar.
•CNC-machined 6061 T-6 aluminum clamshell and throttle tube.
•Includes chrome-plated steel cable ferrules and plated Allen cap clamshell mounting hardware.
•Cable ferrules included with both styles are designed to fit stock H-D thread-in and clip-in cables.
•Throttle grip tube is machined to accept rubber motorcycle grips.

€ 109,00
per stuk
006955 :  Biltwell Whiskey alu trottle Stainless Steel
Single cable for 1 inch handlebar.
•CNC-machined 6061 T-6 aluminum clamshell and throttle tube.
•Includes chrome-plated steel cable ferrules and plated Allen cap clamshell mounting hardware.
•Cable ferrules included with both styles are designed to fit stock H-D thread-in and clip-in cables.
•Throttle grip tube is machined to accept rubber motorcycle grips.

€ 109,00
per stuk
006951 :  Biltwell Whiskey alu trottle Black
Dual cable for 1 inch handlebar.
•CNC-machined 6061 T-6 aluminum clamshell and throttle tube.
•Includes chrome-plated steel cable ferrules and plated Allen cap clamshell mounting hardware.
•Cable ferrules included with both styles are designed to fit stock H-D thread-in and clip-in cables.
•Throttle grip tube is machined to accept rubber motorcycle grips.

€ 109,00
per stuk
006954 :  Biltwell Whiskey alu throttle Black
Single cable for 1 inch handlebar.
•CNC-machined 6061 T-6 aluminum clamshell and throttle tube.
•Includes chrome-plated steel cable ferrules and plated Allen cap clamshell mounting hardware.
•Cable ferrules included with both styles are designed to fit stock H-D thread-in and clip-in cables.
•Throttle grip tube is machined to accept rubber motorcycle grips.

€ 109,00
per stuk
006942 :  AVON PERF. CUSTOM CONTOUR GRIPS PINK
CHROME, FOR 1 INCH HANDLEBARS
Fits: UNIVERSAL

€ 56,50
per set
006943 :  AVON PERF. CUSTOM CONTOUR GRIPS PINK
BLACK ANODIZED, FOR 1 INCH HANDLEBARS
Fits: UNIVERSAL

€ 56,50
per set
006941 :  AVON PERF. AIR CUSHIONED GRIPS, PINK
BLACK ANODIZED, FOR 1 INCH HANDLEBARS
Fits: UNIVERSAL

€ 56,50
per set
006940 :  AVON PERF. AIR CUSHIONED GRIPS, PINK
CHROME, FOR 1 INCH HANDLEBARS
Fits: UNIVERSAL

€ 56,50
per set
006912 :  Right Throttle Rocker
The Throttle Rocker attaches to the grip with a Velcro strap & allows you to maintain a steady cruising speed without keeping a tight grip on the throttle.
Simpel maar doeltreffend hulpstuk om het gasgeven wat te vergemakkelijken.
Op lange ritten biedt "the Throttle Rocker" veel comfort want je hoeft het gashendel niet meer helemaal vast te houden.De hand rust met de muis op "the Throttle Rocker" en de vingers zijn vrij.
Simpele montage.
USA made.

€ 14,50
per stuk
001776 :  Kuryakyn Throttle-Boss
Ideaal op lange ritten,bediening van het gashendel zonder de greep helemaal vast hoeven te houden.( incl.langere boutjes )

€ 21,50
per stuk
006913 :  Universal Throttle Boss
Regardless of what type of bike you ride, the Throttle Boss™ will make riding any distance more comfortable.
Designed to fit any type or size grip, the Throttle Boss™ can be installed in seconds to provide a cushioned "platform" to rest one's palm.
When not in use, it can be quickly removed (without tools) & stowed in a jacket pocket, tool bag, etc.

Simpel maar doeltreffend hulpstuk om het gasgeven wat te vergemakkelijken.
Op lange ritten biedt "the Throttle Boss" veel comfort want je hoeft het gashendel niet meer helemaal vast te houden.De hand rust met de muis op "the Throttle Boss" en de vingers zijn vrij.
Simpele montage.
USA made.

€ 15,50
per stuk
000653 :  Throttle clamp Chroom
Single cable.
Past standaard op :
Big-Twin & Sportsters 74-80
Aansluiting :
1/4 UNC elleboog pull kabel.

€ 9,50
per stuk
000652 :  Throttle clamp Chroom
Single cable.
Aansluiting :
5/16 UNC elleboog pull kabel.

€ 14,50
per stuk
004459 :  Throttle clamp Chroom
Single cable.
Aansluiting :
5/16 UNC elleboog pull kabel.
Excl. gashuls, los bij te bestellen.

€ 15,50
per stuk
007597 :  Throttle clamp Zwart
Dual cable.
Past standaard op :
Big-Twin & Sportsters 81-95
Aansluitingen :
5/16 UNC elleboog pull kabel.
1/4 UNC elleboog push kabel.
Opmerking :
Ook te gebruiken voor "single cable" situaties als de gaskabel dus een 5/16 UNC elleboog heeft.

€ 9,50
per stuk
007596 :  Throttle clamp Zwart Dual Cable
Dual cable.
Past standaard op :
Big-Twin & Sportsters 81-95
Aansluitingen :
5/16 UNC elleboog pull kabel.
1/4 UNC elleboog push kabel.
Opmerking :
Ook te gebruiken voor "single cable" situaties als de gaskabel dus een 5/16 UNC elleboog heeft.

€ 9,50
per stuk
010009 :  Throttle clamp Zwart Single Cable
Single cable.
Past standaard op :
Big-Twin & Sportsters 74-80
Aansluiting :
1/4 UNC elleboog pull kabel.

€ 9,50
per stuk
005485 :  Throttle clamp Chroom
Dual cable.
Past standaard op :
Big-Twin & Sportsters 81-95
Aansluitingen :
5/16 UNC elleboog pull kabel.
1/4 UNC elleboog push kabel.
Opmerking :
Ook te gebruiken voor "single cable" situaties als de gaskabel dus een 5/16 UNC elleboog heeft.

€ 8,50
per stuk
005909 :  Throttle clamp Chroom
Dual cable.
Past standaard op :
Big-Twin & Sportsters 81-95
Aansluitingen :
5/16 UNC elleboog pull kabel.
1/4 UNC elleboog push kabel.
Opmerking :
Ook te gebruiken voor "single cable" situaties als de gaskabel dus een 5/16 UNC elleboog heeft.
Excl. gashuls, los bij te bestellen.

€ 15,50
003585 :  Huls gashendel dubbel kabel
Kunststof huls voor dubbele gaskabel.
Geschikt voor alle 1 inch sturen.

€ 3,50
003584 :  Huls gashendel enkel kabel
Kunststof huls voor enkele gaskabel.
Geschikt voor alle 1 inch sturen.

€ 3,50
007614 :  Huls gashendel Fly-By-Wire
Kunststof huls voor electronic gas.
Geschikt voor alle 1 inch sturen.
Fits Big Twin models 2008/Later with Fly-By-Wire throttle.

€ 5,50
per stuk
002870 :  Gashendel Chroom
Single cable.
Past standaard op :
Big-Twin & Sportsters 74-80
Aansluiting :
1/4 UNC elleboog pull kabel.

€ 9,75
per stuk
001946 :  Gashendel Chroom
Dual cable.
Past standaard op :
Big-Twin & Sportsters 81-95
Aansluitingen :
5/16 UNC elleboog pull kabel.
1/4 UNC elleboog push kabel.
Opmerking :
Ook te gebruiken voor "single cable" situaties als de gaskabel dus een 5/16 UNC elleboog heeft.

€ 11,00
per stuk
003926 :  Gashendel single cable metal
Universeel gashendel met metalen huls.
Geschikt voor alle 1 inch sturen.

€ 12,50
per stuk
005530 :  Frictie plaatje gashendel schroef
Big-Twin, XL Sportster 74-11.
( Excl. 08-11 Touring )
V-Rod 02-11.

€ 1,60
per stuk
006302 :  Throttle screw kit small
74 up Big Twin/XL Sportster.

€ 2,50
per kit
000851 :  Throttle screw kit large
74 up Big Twin/XL Sportster.

€ 9,50
per kit
000981 :  Schakelaar toeter/starter
Early style toeter/starter schakelaar.

€ 8,50
001945 :  Early-Style stuurschakelaar licht hi/lo
Reproduction handlebar switch like used on early H-D models.
Chrome plated, incl. wiring.
Note :
wiring runs through handlebar.

€ 9,00
per stuk
000756 :  Stuurlint zwart
Ouderwets lint zoals op de vroegere racefietsen.
Weer wat anders dan poedercoaten.
25 mm breed x 250 cm lang.
Wat heb je ongeveer nodig ?
Apehanger 1 inch dik 13" rise ca. 4 rolletjes.
Apehanger 1¼ inch dik 16" rise ca. 6 rolletjes.

€ 3,95
per stuk
002746 :  Frictieplaatset stuurdemper
Big-Twin 49-84.
Made in USA

€ 7,50
per paar
001109 :  Montage beugel spiegels, speedo's
Chroom voor 1 inch stuur.
Te gebruiken voor o.a montage spiegels,mini-speedos e.d.

€ 8,50
per stuk
000770 :  Montage beugel
Alu.black anonized voor 1" stuur.
o.a voor montage mini speedo.

€ 24,50
000769 :  Montage beugel
Alu.chroom voor 1" stuur.
o.a voor montage mini speedo.

€ 27,50
003993 :  Stuurdemper knop kit
Chroom reproductie set van het gedeelte wat boven op het forkpanel zichtbaar is.
Deze set werd standaard geleverd op de FL modellen van 49-77 met zijspan.
Is ook een mooie afwerking op andere modellen mits de balhoofdpen het juiste binnendraad heeft.

€ 32,50
per set
002745 :  Revisie kit stuurdemper FL
Complete kit voor alle FL modellen 49-84 4speed.

€ 38,50
per kit
008029 :  Stuurdemper kit FL/FLH 60-84
Kit includes alloy fork steering damper knob, fork steering damper plate, fork damper plate with pin, damper plate with hole, triple tree top nut, friction gasket, triple tree damper knob springs and damper spider spring.
Excl. no. 63 on exploded view.

€ 142,50
per kit
008030 :  Stuurdemper kit FL/FLH 60-84
Kit includes alloy fork steering damper knob, fork steering damper plate, fork damper plate with pin, damper plate with hole, triple tree top nut, friction gasket, triple tree damper knob springs and damper spider spring.
Incl. no. 63 on exploded view.

€ 157,50
per kit